Gateway 205 User Manual page 24

Using the Gateway 205 Projector
To connect the projector to a DVD player or VCR using S-Video:
1
Plug the S-Video cable connector into the S-Video port on the back of the
projector, then plug the other end into the S-Video port on the back of
the DVD player or VCR.
2
Plug the red and white connectors from a composite video cable into the
corresponding ports on the back of the DVD player or VCR, then plug the
red and white connectors on the other end to the corresponding ports on
an audio receiver.
20 www.gateway.com