1. Manuals
  2. Brands
  3. Time Manuals
  4. Bicycle
  5. RXRS Ulteam
  6. Instruction manual

Time RXRS Ulteam Instruction Manual

Hide thumbs

Advertisement

Table of Contents

Projet de notice de montage
RXRS Ulteam
WARNING
It is important to read the instructions below and respect the following recommendations:
Bicycling can occasionally lead to falls or accidents.
Use caution when using your bike.
Follow all the rules of the road and don't forget to wear a helmet.
Keep these instructions in case you need them later.
WARRANTY AGAINST MANUFACTURING DEFECTS
TIME SPORT INTERNATIONAL guarantees this product is free of any defects, whether in the materials used
or in the way it has been made.
This warranty is strictly limited to the replacement of the parts identified defective by the TIME after-sales
service department.
Warning: This warranty doesn't involve TIME products given to sponsored racing professionals or amateurs.
Duration: The warranty given by TIME is a lifetime warranty, only for the original buyer, against material or
manufacturing defects.
It only applies to products sold by a TIME authorized retailer.
Limitations: The TIME warranty does not cover the finish, damages or defects caused by abnormal use, lack of
maintenance, an accident, a fall, or a failure to follow the recommendations enclosed in the instruction manual.
Modifications: Any unauthorized alteration cancels the warranty.
Procedure: For any problem regarding the frame, please contact your TIME retailer. They will call the
TIME after-sales service department who will open a return folder. The TIME retailer will then return
the module to the after-sales department with the original invoice, the warranty card, and a letter
specifying the reasons for the return, as well as a detailed description of the problem encountered, the
kind of use, each component's reference number, and the number of kilometers ridden.
Cost: The TIME after-sales service department will decide if the repairing will be free of charge as soon
as the materials are received. The customer will have to pay for both disassembly and reassembly, as
well as shipping costs. TIME SPORT INTERNATIONAL will cover the cost of return shipping to the
retailer, if the repairs fall under the warranty.
Recommendations: TIME recommends scrupulously following the instructions for the assembly and use of the
module. In the event of an impact or a fall, the module can suffer from very high stresses whose effects may be
delayed, causing cracking or even a breakage of the structure.
- 1 -

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RXRS Ulteam and is the answer not in the manual?

Questions and answers

Related Manuals for Time RXRS Ulteam

Summary of Contents for Time RXRS Ulteam

  • Page 1 Warning: This warranty doesn't involve TIME products given to sponsored racing professionals or amateurs. Duration: The warranty given by TIME is a lifetime warranty, only for the original buyer, against material or manufacturing defects. It only applies to products sold by a TIME authorized retailer.
  • Page 2 TO YOUR TIME RETALIER FOR A THOROUGH INSPECTION. WARNING: The warranty will work only if the removable flap, stamped and signed by the TIME retailer, is sent to TIME SPORT INTERNATIONAL by the buyer within 10 days of the purchase date.

  • Page 3: Safety Information

    For maintenance operations and bike adjustments, never place the forks on the ground (abnormal wear caused by abrasion will cancel the warranty). Never file down the safety latches! When in doubt contact the TIME after-sales service department. Tightening torques: Carefully follow all tightening torques in order to maintain proper function and security.
  • Page 4 - Do not leave your bike exposed to a strong heat source. - In case of a fall, have your bike checked by a retailer or by the TIME after-sales service department. - When in doubt about a part of your module, contact the TIME after-sales service department.

  • Page 5: Saddle Height Adjustment

    Before setting up the bike, make sure all parts and components are compatible with the TIME module frame. In order to adapt the TIME Translink module to the user's height and position, it will be necessary to adjust the stem height as well as the saddle height.
  • Page 6 Projet de notice de montage RXRS Ulteam Figure 2 Figure 2-1 Loosely tighten the saddle in order to position it horizontally (fig.3) Figure 3 Warning: Take into account the wide range of saddle shapes according to the numerous models. One...
  • Page 7 Projet de notice de montage RXRS Ulteam Translink Tube HS max (800mm Figure 5 5) Determine the cutting dimension Subtract the maximum height of the saddle from the desired dimension (in our example 800mm – 758 mm = 42 mm).
  • Page 8 Projet de notice de montage RXRS Ulteam Translink cutting tool Ref: 55006004 Figure 6 - 8 -...
  • Page 9 Projet de notice de montage RXRS Ulteam 7) Final assembly of the seatpost on the frame Position the saddle tightening collar on the TransLink tube (Be careful not to damage the paint!) (fig.7) Figure 7 - Slide the seatpost assembly into the tube of the frame (fig.8)
  • Page 10 Projet de notice de montage RXRS Ulteam Lightly tighten the collar bolt. - Finalize the adjustment of the saddle on the seatpost. - Tighten to a final torque of 4 Nm while being careful to tighten each bolt alternately (fig.9)
  • Page 11 The QUICKSET concept involves separating the headset adjustment from the stem adjustment, all while maintaining the advantages of the Aheadset system (TIME patent). The cyclist can therefore adjust their position without changing the headset adjustment. This solution makes any sort of compression system obsolete.
  • Page 12 Projet de notice de montage RXRS Ulteam Position the 31.8 hanger. Assemble the bracket with the bolts and tighten to a torque of 6 Nm while being careful to balance the tightening. Warning: A bracket with a diameter less than 31.7 or greater than 31.9 can lead to usage problems.
  • Page 13 Projet de notice de montage RXRS Ulteam Figure 11 4) Replace the stem - Position the stem and make sure the height of the fork steer tube is between 0.5 and 2 mm below the upper face of the stem (fig.
  • Page 14 RXRS Ulteam C) BOTTOM BRACKET SET-UP The TIME RXRS frames and modules are made to fit the new benchmark of bottom brackets, the BB 30. Before proceeding to set-up, make sure that your bottom bracket is compatible with the BB30.
  • Page 15 Before proceeding to set-up, familiarize yourself with the manufacturer's spec sheet for the rear derailleur. The TIME module is compatible with 10 and 11 speed derailleurs. - Lightly grease the attachment bolt before set-up. - Standard thread M 10 X 100 Warning: If adjusting the rear derailleur hanger turns out to be necessary, it is important to have a professional do this with the correct tool.

  • Page 16: Supplementary Components

    Projet de notice de montage RXRS Ulteam G) SUPPLEMENTARY COMPONENTS Your TIME frame or module comes with a certain number of supplementary components! 1) Cable stop protectors They should be placed on the derailleur cable stops in order to avoid rubbing and impacts with the frame (Ref: 55005998) (fig.

  • Page 17: Adjustments And Maintenance

    Projet de notice de montage RXRS Ulteam It should be placed on the front derailleur cable in order to protect the frame from rubbing (Ref: 55006065) (fig. 19) Protection sleeve Figure 19 H) ADJUSTMENTS AND MAINTENANCE 1) Headset adjustment The TIME modules or frames are equipped with a QUICKSET headset.
  • Page 18 Reassemble the stem. 55006027 Warning: The TIME headset bearings have a specific orientation! Do not in any case use bearings that are adaptable or from another brand. Doing so will put the rider at risk and irreversibly damage your frame.
  • Page 19 Projet de notice de montage RXRS Ulteam Expanded view of headset set-up Compression cap Stem Spacer O-ring Upper bearing QUICK SET collar Collet Lower bearing Headset seal - 19 -...
  • Page 20 Projet de notice de montage RXRS Ulteam 3) Rear derailleur support replacement. Loosen the 2 M3 screws with a phillips screwdriver. Remove the damaged derailleur support. Lightly grease the supporting surface on the frame. Position the new derailleur support (ref: 55003337) Tighten the 2 M3 phillips screws.

Table of Contents