Related Manuals for Caple PH500E
Summary of Contents for Caple PH500E
- Page 1 Electric Plinth Heater instruction manual PH500E Contact Caple on 0117 938 7420 or for spare parts www.caple.co.uk PH500E Instruction manual.indd 1 24/10/2016 17:02...
-
Page 2: Table Of Contents
CONTENTS Safety warnings Environmental Protection Fitting Instructions Operation Troubleshooting Maintenance Technical Data Guarantee Please keep this instruction manual for future reference Instruction manual PH500E PH500E Instruction manual.indd 2 24/10/2016 17:02... -
Page 3: Safety Instructions
Care should be taken to avoid touching heating elements. - To prevent fire hazards do not block the ventilation grille - Keep all flammable materials away from the appliance. Please keep this instruction manual for future reference Instruction manual PH500E PH500E Instruction manual.indd 3 24/10/2016 17:02... - Page 4 - Ensure that the supply cord is not wedged during the installation. If the supply cord is damaged, it must be replaced by a Caple service technician or similarly qualified persons in order to prevent a hazard. - Do not use harsh abrasive cleaners or sharp metal scrapers to clean the grille, as this may damage or scratch the surface.
-
Page 5: Environmental Protection
This appliance has been manufactured to the strictest standards and complies with all applicable legislation, Low Voltage Directive (LVD) and Electromagnetic Compatibility (EMC). Please keep this instruction manual for future reference Instruction manual PH500E PH500E Instruction manual.indd 5 24/10/2016 17:02... -
Page 6: Fitting Instructions
96mm 360mm A = Width of cut out B = Height of cut out Floor mounting Plinth mounting Please keep this instruction manual for future reference Instruction manual PH500E PH500E Instruction manual.indd 6 24/10/2016 17:02... - Page 7 Once the heater is in the correct position secure the grill to the plinth using the 2 screws provided at point “A” Grill securing point “A” Please keep this instruction manual for future reference Instruction manual PH500E PH500E Instruction manual.indd 7 24/10/2016 17:02...
-
Page 8: Operation
- If you require more heat move the bottom switch to Boost “ II ” - To switch off move the power switch to OFF “0” “0” OFF “I” ON “I” Low (950w) “II” Boost (1900w) Please keep this instruction manual for future reference Instruction manual PH500E PH500E Instruction manual.indd 8 24/10/2016 17:02... -
Page 9: Troubleshooting
- Once cooled down switch on power supply and retry. NOTE: If a problem still persists please conctact Caple Service 0117 938 7420 Please keep this instruction manual for future reference Instruction manual PH500E PH500E Instruction manual.indd 9... -
Page 10: Maintenance
Before any maintenance is carried out on the unit the electrical supply must be isolated. Maintenance should be restricted to dust and lint removal around the unit. Do not tamper with any electrical parts A Caple approved engineer or highly competent person(s) should be used for other maintenance requirements. - Page 11 Notes Please keep this instruction manual for future reference Instruction manual PH500E PH500E Instruction manual.indd 11 24/10/2016 17:02...
- Page 12 Caple Service Fourth Way Avonmouth Bristol BS11 8DW t: 0117 938 7420 e: service@caple.co.uk www.caple.co.uk Please keep this instruction manual for future reference Instruction manual PH500E PH500E Instruction manual.indd 12 24/10/2016 17:02...
Need help?
Do you have a question about the PH500E and is the answer not in the manual?
Questions and answers