NOZOMI NETWORKS NCMC-100 Getting Started

NCMC-100 Guardian Appliance - Getting Started
v1.01 (Oct 2021)
1. Unpacking the system
Inspect the chassis to see whether the appliance has been damaged in any way. If the
appliance appears to be damaged, please contact Nozomi Networks support at
support@nozominetworks.com
Box contents:
- Nozomi Networks NCMC-100 Guardian appliance
- 2x Rack Mount Ears
- 8x Flat head screws for fixing rack mounting brackets
- 8x M5 screws for rack mounting
- 2x Rack rails
- 1x Grounding cable
- 2x RJ45 Cat.6 straight cable (2m.)
- 1x RJ45 Console cable
- 1x Power chords
2. Setup Precautions and Considerations
Please follow the general safety guidelines included in the box to prevent potential
property damage, personal injury or even death.
Furthermore, observe the following rules:
- Before performing any of the following procedures, ensure that power has been
removed from the AC or DC
- Read the installation instructions before you connect the system to its power
- Warning: To prevent the system from overheating, do not operate it in an area that
exceeds the maximum recommended temperature:
Operating Environment
Storage Environment
.
circuit.
Temperature: 0 – 45°C (32 – 113°F)
Humidity: 20 – 90 % RH
Temperature: -10 – 70°C (14 – 158°F)
Humidity: 5 – 95 % RH @ 55°C
source.