Magic Bullet 02643 User Manual page 5

EDGES OF THE
BLADES. TO AVOID
LACERATION INJURY,
DO NOT HANDLE OR
TOUCH ANY SHARP
COMPONENTS OF
THE BLADE.
NEVER STORE
EXPOSED BLADES ON
THE MOTOR BASE.
EXPOSED BLADES CAN
PRESENT THE HAZARD
OF LACERATION AND
SEVERE PERSONAL
INJURY. ALWAYS
ATTACH BLADE TO THE
BLENDING PITCHER
WHEN STORING.
Do not remove the
•
Blending Pitcher until
blades have come
to a complete stop.
Removing before
the blades come to
a complete stop can
cause damage to the
attachments or unit.
POWER OFF
Always
•
UNPLUG
and the unit
and wait until the Blade
comes to a complete
stop before assembling,
disassembling,
changing accessories,
8
or cleaning.
ALWAYS
securely
•
tighten the
Cross Blade to the
Blending Pitcher
to prevent leakage.
DO NOT
attempt to
•
disengage the Blending
Pitcher from the Motor
Base if it starts to leak
during blending. If a
leak occurs, power
off or unplug the unit
and allow the motor
to come to a complete
stop before removing
the Blending Pitcher.
This will prevent
risk of separation of
and exposure to the
spinning blade.
DO NOT crush ice. Your
•
magic bullet Blender
®
is not intended to be
used as an ice crusher,
which may shatter
the Blending Pitcher,
causing injury
or damage.
DO NOT blend stone
•
fruit in this appliance
unless pits/seeds have
been removed. Fruit
pits may damage
the Blending Pitcher,
potentially resulting in
shattering and personal
injury. In addition,
apple seeds and the
pits of cherries, plums,
peaches, and apricots
contain a chemical
known to release
cyanide into the body
when ingested.
Do not overload the
•
Blending Pitcher as
this may prevent the
Blade from spinning.
If this occurs, turn off
the unit, empty some of
the contents, reattach,
and resume.
Do not attempt to grind
•
dry ingredients such as
grains, cereal, or coffee,
as this may damage the
motor and/or Blade.
Use of dry ingredients
may cause the motor
to overheat.
AVOID CONTACT WITH
•
MOVING PARTS!
Keep
hands and utensils out
of and away from the
Blade to reduce the
risk of severe personal
injury or damage to
the unit.
NEVER
place the Blade or
•
any magic bullet part or
®
accessory on the bottom
rack of the dishwasher
or use the heat/sanitize
cycle.
Periodically inspect your
•
Cross Blade. If the blades
do not rotate freely or are
damaged, immediately
discontinue use and
contact Customer
Service. If the gasket to
the Blade is missing or
damaged, discontinue
use and contact
Customer Service. We
recommend replacing
the Blade every 6 months
(depending on use), or
as needed for optimal
performance.
Do not use after-market
•
replacement parts
for your magic bullet
®
Blender. After-market
replacement parts may
result in damage to your
magic bullet
®
Blender or create safety
hazards resulting in
bodily injury or damage.
Only order replacement
parts from
9