Download Print this page

Magic Bullet 02643 User Manual page 10

Advertisement

user interface.
user interface.
LOW
HIGH
PULSE
home
The dial is in the center
position. The blender is
not running.
Pulse - With the dial in center position, press and hold the PULSE button.
LOW
HIGH
PULSE
low
Turn the dial to the left to start
a preset low-speed blend cycle.
HOME
Turn the dial back to
when fi nished.
warning!
NEVER blend hot, warm, or carbonated ingredients in the magic
bullet
Cup!
When using a Cup attachment, after two consecutive blends cycles
®
wait 10 minutes before blending another cycle. Never attempt to open the Cup if it
High - Turn the dial to the right to start a preset high-speed blend cycle.
is warm to the touch, allow the Cup and its content to cool at least 15 minutes
Turn the dial back to HOME when finished
before attempting to open.
18
LOW
HIGH
PULSE
pulse
With the dial in the center
position, press and hold the
PULSE
button. To stop blending,
release the
PULSE
button.
HIGH
To stop blending, release the PULSE button
LOW
PULSE
high
Turn the dial to the right to start
a preset high-speed blend
cycle. Turn the dial back to
HOME
when fi nished.
Turn the dial back to HOME when finished
using the
blender pitcher.
warning!
Only operate the Blending
Pitcher with the Pitcher Lid
securely attached.
Never turn the power on while
using the Pitcher without the
Vented Lid Cap inserted and
locked into place!
LOW
HIGH
PULSE
1
Motor Base
Place the
on a
clean, dry, level surface.
Inspect the Pitcher and ensure the Pitcher and Blade are secured. You can tighten and
Place the Motor Base on a clean, dry, level surface
Always use extreme care
and attention when blending
hot ingredients!
Always use caution when
opening the Pitcher Lid after
blending hot ingredients!
48
6
MAX
LIQUID
40
5
MAX
32
4
24
3
16
2
8
1
2
Pitcher
Inspect the
and
Pitcher
ensure the
and
loosen the Blade by twisting it in the direction indicated on the bottom of the Pitcher
Blade
are secured. To
tighten the Blade, twist it
counter-clockwise onto the
bottom of the Pitcher. To
loosen/release the Blade,
twist it clockwise until it
Pitcher
detaches from the
.
19

Advertisement

loading
Need help?

Need help?

Do you have a question about the 02643 and is the answer not in the manual?

Questions and answers