The purpose of this document is to provide a description of Ximea accessories and to describe the correct way to install related software, drivers and run it successfully. Please read this manual thoroughly before operating your new Ximea accessories for the first time. Please follow all instructions and observe the warnings.
General description Figure 1: isometric view of XC-X4G3-SFF-X4G3-IPASS Adapter connecting target iPass X4 interface to SFF-8644 host PCIe Gen3 x4 bandwidth with a link speed of 32 Gb/s For use with camera series or xSWITCH devices (equipped with iPass X4 connector)
Dimensional drawings Figure 2: dimensional drawing of XC-X4G3-SFF-X4G3-IPASS Width [ W ] Height [ H ] Depth [ D ] Mass [ M ] Material 24 mm 20.8 mm 69.3 mm 38 g Machined Aluminum alloy Table 1: mechanical parameters...
Additional information Optical SFF cables are compatible with all CB500 cameras and CB120/CB200 cameras starting from hardware revision 6. XIMEA Technical Manual, Version: v240830...
Quickstart guide Hardware setup 5.1.1 Essential components Host PC with supported SFF host adapter card (e.g. Ximea HA-2P-X4G3-SFF-X4G3) inside SFF-8644 fiber optic cable (e.g. Ximea CBL-SFF-X4G3-10M0) any xiB camera 5.1.2 Connecting the components Make sure the DIP switches on the host adapter card are in position for x4 ports.
Need help?
Do you have a question about the XC-X4G3-SFF-X4G3-IPASS and is the answer not in the manual?
Questions and answers