The purpose of this document is to provide a description of Ximea accessories and to describe the correct way to install related software, drivers and run it successfully. Please read this manual thoroughly before operating your new Ximea accessories for the first time. Please follow all instructions and observe the warnings.
General description Figure 1: isometric view of XC-X8G3-SFF-X8G3-IPASS Adapter connecting iPass X8 target interface to SFF-8644 host interface PCIe Gen3 x8 bandwidth with a link speed of 64 Gb/s For use with xiB-64 camera series or xSWITCH devices (equipped with iPass X8 connector)
Figure 2: dimensions of converter Width [ W ] Height [ H ] Depth [ D ] Mass [ M ] Material 36 mm 20.8 mm 69.3 mm 57.7 g Machined Aluminum alloy Table 1: mechanical parameters XIMEA Technical Manual, Version: v240830...
Connect SFF-8644 fiber optic cables to the XC-X8G3-SFF-X8G3-IPASS Step 2. Connect the cable from the port A on the host adapter to the port A on the XC-X8G3-SFF-X8G3-IPASS Connect the cable from the port B on the host adapter to the port B on the XC-X8G3-SFF-X8G3-IPASS Step 3.
Need help?
Do you have a question about the XC-X8G3-SFF-X8G3-IPASS and is the answer not in the manual?
Questions and answers