Table of Contents
Advertisement
Quick Links
Manual
AL-602-01-921
EnoPuck
®
EnOcean Sensor and RGB-LED for CO2 and
sound pressure level measurement
EnOcean / 921.7 MHz
Version 1.01
© DEUTA Controls GmbH
07.08.2023
Technical data might change
Page 1 of 24
CO2
/ NCC / TAIWAN
Paffrather Str. 140, 51465 Bergisch Gladbach
Hauptstraße 76, 32479 Hille
info@deuta-controls.de;
Tel: +49 5734 51466 - 0
www.deuta-controls.net
Fax:+49 5734 51466 - 28
Advertisement
Chapters
Table of Contents
Related Manuals for DEUTA Controls EnoPuck CO2
Summary of Contents for DEUTA Controls EnoPuck CO2
- Page 1 EnOcean Sensor and RGB-LED for CO2 and sound pressure level measurement / NCC / TAIWAN EnOcean / 921.7 MHz Version 1.01 © DEUTA Controls GmbH Paffrather Str. 140, 51465 Bergisch Gladbach 07.08.2023 Hauptstraße 76, 32479 Hille Tel: +49 5734 51466 - 0 Technical data might change info@deuta-controls.de;...
- Page 2 Reproduction, translation, electronic and phototechnical filing/archiving (e.g., photocopying) as well as any amendments require the written consent of DEUTA Controls GmbH, Bergisch Gladbach, Germany. Non-observance will involve the right to assert damage claims.
-
Page 3: Table Of Contents
Sensor: Ambient light / brightness ................15 Sensor: Motion / PIR ....................15 User interfaces .......................15 Housing / connection technology ................15 © DEUTA Controls GmbH Paffrather Str. 140, 51465 Bergisch Gladbach 07.08.2023 Hauptstraße 76, 32479 Hille Tel: +49 5734 51466 - 0 Technical data might change info@deuta-controls.de;... - Page 4 ® CO2 ................19 Device labels .........................21 NCC statement ......................22 Ordering information ....................22 Revision history ......................24 © DEUTA Controls GmbH Paffrather Str. 140, 51465 Bergisch Gladbach 07.08.2023 Hauptstraße 76, 32479 Hille Tel: +49 5734 51466 - 0 Technical data might change info@deuta-controls.de;...
-
Page 5: About This Manual
This Manual describes the products AL-602-01-92 (EnoPuck CO2) • (also referred to as "PRODUCT" or „EnoPuck CO2“ in this document). These operating instructions are part of the product. • You may only use the product if you have fully read and understood this manual. -
Page 6: Validity Of This Documentation
FW/HW Version 1.0/1.1. The device must only be installed and operated according to the instructions in this manual. © DEUTA Controls GmbH Paffrather Str. 140, 51465 Bergisch Gladbach 07.08.2023 Hauptstraße 76, 32479 Hille... -
Page 7: Symbols / Information On Safety
Damage to Property Indicates a potentially hazardous situation which, if not avoided, may result in damage to property. © DEUTA Controls GmbH Paffrather Str. 140, 51465 Bergisch Gladbach 07.08.2023 Hauptstraße 76, 32479 Hille... -
Page 8: Information On Product Safety
External power supply 12 V DC for standard power outlet, desk version 2.2 Predictable incorrect application The product EnoPuck® CO2 must never be used in the following cases and for the following purposes: © DEUTA Controls GmbH Paffrather Str. 140, 51465 Bergisch Gladbach 07.08.2023 Hauptstraße 76, 32479 Hille... - Page 9 (such as bathrooms). Risk of overheating! Do not position the EnoPuck® CO2 close to the floor or the ceiling, between shelves or behind curtains. © DEUTA Controls GmbH Paffrather Str. 140, 51465 Bergisch Gladbach 07.08.2023 Hauptstraße 76, 32479 Hille Tel: +49 5734 51466 - 0 Technical data might change info@deuta-controls.de;...
-
Page 10: Qualification Of Personnel
Electrical and electronic equipment must be disposed of properly after use. Note only for EU: WEEE 2012/19/EU applies throughout Europe. Directives and laws may vary nationally. © DEUTA Controls GmbH Paffrather Str. 140, 51465 Bergisch Gladbach 07.08.2023 Hauptstraße 76, 32479 Hille... -
Page 11: Device Description
4.4 Factory settings The basic configuration of an EnoPuck CO2 is actually as follows: ® © DEUTA Controls GmbH Paffrather Str. 140, 51465 Bergisch Gladbach 07.08.2023 Hauptstraße 76, 32479 Hille Tel: +49 5734 51466 - 0 Technical data might change info@deuta-controls.de;... -
Page 12: External Product Interface
CO2 must not be used in any relation with equipment that supports, ® directly or indirectly, human health or life or with applications that can result in danger for people, animals or real value. © DEUTA Controls GmbH Paffrather Str. 140, 51465 Bergisch Gladbach 07.08.2023 Hauptstraße 76, 32479 Hille... -
Page 13: Observe Statutory Provisions For Operating Frequency Range
Ensure the EnoPuck ® CO2 is mounted on a non-conductive surface. If it is not, performance may be adversely affected. © DEUTA Controls GmbH Paffrather Str. 140, 51465 Bergisch Gladbach 07.08.2023 Hauptstraße 76, 32479 Hille Tel: +49 5734 51466 - 0 Technical data might change info@deuta-controls.de;... -
Page 14: Technical Data
± 2 % Repeatability 0,1 % Response time Typ. 8 s Table 4: Technical data RH © DEUTA Controls GmbH Paffrather Str. 140, 51465 Bergisch Gladbach 07.08.2023 Hauptstraße 76, 32479 Hille Tel: +49 5734 51466 - 0 Technical data might change info@deuta-controls.de;... -
Page 15: Sensor: Temperature
5.8 Housing / connection technology Connection technology Housing Plastic, PC, white / opaque Table 9: Technical data / housing © DEUTA Controls GmbH Paffrather Str. 140, 51465 Bergisch Gladbach 07.08.2023 Hauptstraße 76, 32479 Hille Tel: +49 5734 51466 - 0 Technical data might change info@deuta-controls.de;... -
Page 16: Power Supply
EN IEC 61000-3-2 :2019 EN 61000-3-3 :2013 EN 55032 :2012/AC :2013 Table 14: Technical data / standards and guidelines © DEUTA Controls GmbH Paffrather Str. 140, 51465 Bergisch Gladbach 07.08.2023 Hauptstraße 76, 32479 Hille Tel: +49 5734 51466 - 0 Technical data might change info@deuta-controls.de;... -
Page 17: Functional Description In Detail
6.2.1 CO2 Teach-In (A5-09-04) If the button is pressed 1x briefly within 2 seconds, a learning telegram for the EEP A5-09-04 is sent after the 2 seconds have elapsed. © DEUTA Controls GmbH Paffrather Str. 140, 51465 Bergisch Gladbach 07.08.2023 Hauptstraße 76, 32479 Hille... -
Page 18: Pir Teach-In (A5-07-01)
Do not open the housing / no serviceable parts inside There are no serviceable parts inside the product. Do not open the housing. Otherwise warranty will be void, and electronic components might be damaged. © DEUTA Controls GmbH Paffrather Str. 140, 51465 Bergisch Gladbach 07.08.2023 Hauptstraße 76, 32479 Hille... -
Page 19: Re-Calibration Of Enopuck ® Co2
CO2 concentration inside the housing as in the outside air. At the end of the time, the value then measured is used as the reference value of 400 ppm. This is the typical CO2 concentration in the outside air. © DEUTA Controls GmbH Paffrather Str. 140, 51465 Bergisch Gladbach 07.08.2023 Hauptstraße 76, 32479 Hille... - Page 20 Avoid mechanical impact after re-clibration! Any mechanical stress between calibration and finally mounting of the EnoPuck CO2 might again influence calibration. ® © DEUTA Controls GmbH Paffrather Str. 140, 51465 Bergisch Gladbach 07.08.2023 Hauptstraße 76, 32479 Hille Tel: +49 5734 51466 - 0 Technical data might change info@deuta-controls.de;...
-
Page 21: Device Labels
Page 21 of 24 8 Device labels The following labels are placed on the bottom side of the devices: Label 1: Positioning: © DEUTA Controls GmbH Paffrather Str. 140, 51465 Bergisch Gladbach 07.08.2023 Hauptstraße 76, 32479 Hille Tel: +49 5734 51466 - 0 Technical data might change info@deuta-controls.de;... -
Page 22: Ncc Statement
Description CO2 traffic light, RGB LED, table version; Multisensor for sound pressure level, CO2, humidity, temperature, vibration, PIR; supply AL-602-01-921 EnoPuck CO2 / voltage 12 V DC (+/-%); 12776 NCC / TAIWAN EnOcean 921 MHz, NCC, TAIWAN, dimensions 100 x 28 mm, housing PC white opaque;... - Page 23 Table 13: Technical data / tests and approvals ..............16 Table 14: Technical data / standards and guidelines ............16 Table 15: Technical data / EnOcean EEP for TX ..............18 © DEUTA Controls GmbH Paffrather Str. 140, 51465 Bergisch Gladbach 07.08.2023 Hauptstraße 76, 32479 Hille...
-
Page 24: Revision History
Initial release 1.01 Lehzen Pohl 7.8.2023 Added NCC statement ------------ End of document ----------- © DEUTA Controls GmbH Paffrather Str. 140, 51465 Bergisch Gladbach 07.08.2023 Hauptstraße 76, 32479 Hille Tel: +49 5734 51466 - 0 Technical data might change info@deuta-controls.de;...
Need help?
Do you have a question about the EnoPuck CO2 and is the answer not in the manual?
Questions and answers