Lenovo ThinkStation P3 Ultra User Manual
  1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Desktop
  5. ThinkStation P3 Ultra
  6. User manual
Lenovo ThinkStation P3 Ultra User Manual

Lenovo ThinkStation P3 Ultra User Manual

Hide thumbs Also See for ThinkStation P3 Ultra:
Table of Contents

Advertisement

Quick Links

Download this manual
ThinkStation P3 Ultra
User Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ThinkStation P3 Ultra and is the answer not in the manual?

Questions and answers

Related Manuals for Lenovo ThinkStation P3 Ultra

Summary of Contents for Lenovo ThinkStation P3 Ultra

  • Page 1 ThinkStation P3 Ultra User Guide...
  • Page 2 • Setup Guide Fourth Edition (September 2024) © Copyright Lenovo 2023, 2024. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-...

  • Page 3: Table Of Contents

    Navigate in the BIOS interface ..Call Lenovo ....Change the display language of UEFI BIOS ..
  • Page 4 ThinkStation P3 Ultra User Guide...

  • Page 5: Discover Your Lenovo Computer

    Discover your Lenovo computer ® Thank you for choosing a Lenovo computer! We are dedicated to delivering the best solution to you. Before starting your tour, please read the following information: • Illustrations in this documentation might look different from your product.
  • Page 6 ThinkStation P3 Ultra User Guide...

  • Page 7: Chapter 1. Meet Your Computer

    Note: Depending on the model, some USB connectors might not be available on your computer. USB device Data rate (Gbit/s) 3.2 Gen 1 3.2 Gen 2 3.2 Gen 2 × 2 Thunderbolt 3 Thunderbolt 4 Power indicator Show the system status of your computer. © Copyright Lenovo 2023, 2024...
  • Page 8 Note: This headset connector does not support standalone external microphones with a TRS (3-pole) plug or headsets with an OMTP-compliant TRRS (4-pole) plug. Related topics • “USB specifications” on page 7. • “Connect to a Bluetooth-enabled device” on page 10. ThinkStation P3 Ultra User Guide...

  • Page 9: Rear

    Rear Description Description Item Item ® Ethernet connector (2.5 GbE) Wi-Fi antenna slot Ethernet connector (1 GbE) Security-lock slot PCI-Express card area Chassis latch USB-A 3.2 Gen 2 connector (smart power on) Power cord connector ™ DisplayPort out connectors USB-A 3.2 Gen 2 connectors Related topics •...

  • Page 10: Expand Your Computer

    You can install one 2.5-inch hard disk drive or one 2.5-inch solid-state drive in the storage bay* drive bay. 4. M.2 solid-state drive You can install one or two M.2 solid-state drives in the M.2 solid-state drive slots. slots * for selected models ThinkStation P3 Ultra User Guide...
  • Page 11 Related topics • “PCI-Express card” on page 48 • “Memory module” on page 44 • “M.2 solid-state drive” on page 33 • “2.5-inch hard disk drive” on page 34 • “Use the BMC card to remotely manage your computer” on page 13 Chapter 1 Meet your computer...

  • Page 12: Specifications

    • Operating: From 0 m (0 ft) to 3048 m (10 000 ft) • Storage: From 0 m (0 ft) to 12192 m (40 000 ft) Temperature • Operating: From 10°C (50°F) to 35°C (95°F) • Storage: From -40°C (-40°F) to 60°C (140°F) Relative humidity ThinkStation P3 Ultra User Guide...

  • Page 13: Usb Specifications

    • The microprocessor models supported in your computer might vary. For a list of supported microprocessor models, contact the Lenovo Customer Support Center. • The ECC memory modules are not supported on the computer models with Intel Core i5 13400T or I3- 13100 microprocessors..

  • Page 14: The Vantage App

    • The available features vary depending on the computer model. • The Vantage app makes periodic updates of the features to keep improving your experience with your computer. The description of features might be different from that on your actual user interface. ThinkStation P3 Ultra User Guide...

  • Page 15: Chapter 2. Get Started With Your Computer

    2. Select the display that you want to configure and change display settings of your preference. Lock the computer Note: Lenovo makes no comments, judgments, or warranties about the function, quality, or performance of the locking device and security feature. You can purchase computer locks from Lenovo.

  • Page 16: Connect To A Bluetooth-Enabled Device (For Selected Models)

    You can connect all types of Bluetooth-enabled devices to your computer, such as a keyboard, a mouse, a smartphone, or speakers. Place the device that you are attempting to connect to less than 10 meters (33 feet) from the computer. ThinkStation P3 Ultra User Guide...

  • Page 17: Diagnostics

    If you are unable to isolate and resolve the problem after running the Vantage app, save and print the log files created by the program. You might need the log files when you speak to a Lenovo technical support representative.
  • Page 18 2. Follow the on-screen instructions. • Use Windows recovery options. 1. Go to https://pcsupport.lenovo.com 2. Detect your computer or manually select your computer model. 3. Navigate to the troubleshooting menu to diagnose the operating system for recovery instructions. ThinkStation P3 Ultra User Guide...

  • Page 19: Chapter 3. Advanced Configurations

    – Maintenance tasks, including backing up configuration items, restoring configuration files, updating firmware, and so on. For details of ThinkStation BMC remote management console, access the following Web site: https://support.lenovo.com/docs/bmc_web_guide Overview of the BMC card © Copyright Lenovo 2023, 2024...
  • Page 20 1. Ensure that the cable is correctly connected to the BMC card and to the system board. 2. Ensure that the BMC card is correctly installed. 3. If the LED is still off, replace the BMC card with a new one. ThinkStation P3 Ultra User Guide...

  • Page 21: Set The Power Plan

    You can update the BMC firmware to the latest depending on your needs. 1. Go to and follow the on-screen instructions to select https://support.lenovo.com/docs/bmc_fw_ts_x576 and download the corresponding firmware installation package. 2. Log in to the BMC remote management console on the host computer.

  • Page 22: Use Bios Security Solutions

    • Antivirus programs Lenovo preinstalls a full-version antivirus software on selected models of computer. It helps defend the computer against viruses, safeguard your identity, and keep your personal information secured. • Absolute Persistence Absolute Persistence technology is embedded in firmware.

  • Page 23: Uefi Bios Passwords

    2. Select Security ➙ Cover Tamper Detected and press Enter. 3. Select Enabled and press Enter. 4. Press F10 or Fn+F10 to save the changes and exit. If the cover presence switch is enabled and the computer cover is not correctly installed or closed, an error message will be displayed when you turn on the computer.

  • Page 24: What Is Uefi Bios

    You should record your passwords and store them in a safe place. If you forget the passwords, contact a Lenovo-authorized service provider. Note: If the hard disk password is forgotten, Lenovo cannot remove the password or recover data from the storage drive.

  • Page 25: Navigate In The Bios Interface

    Navigate in the BIOS interface Attention: The default configurations are already optimized for you in boldface. Improper change of the configurations might cause unexpected results. Depending on your keyboard, you can navigate in the BIOS interface by pressing the following keys, or combinations of Fn and the following keys: Function F1 or Fn+F1...

  • Page 26: Change The Boot Priority Order

    1. Restart the computer. When the logo screen is displayed, press F1 or Fn+F1. 2. Select Security ➙ Configuration Change Detection and press Enter. 3. Enable or disable the feature as desired. 4. Press F10 or Fn+F10 to save the changes and exit. ThinkStation P3 Ultra User Guide...

  • Page 27: Enable Or Disable The Automatic Power-On Feature

    Microsoft constantly makes updates to the Windows operating system. Before installing a particular Windows version, check the compatibility list for the Windows version. For details, go to: https://support.lenovo.com/us/en/solutions/windows-support To change the BIOS settings: 1. Restart the computer. When the logo screen is displayed, press F1 or Fn+F1.
  • Page 28 Open the Vantage app to check the available update packages. If the latest UEFI BIOS update package is available, follow the on-screen instructions to download and install the package. • From the Lenovo Support Web site: 1. Go to https://pcsupport.lenovo.com 2.

  • Page 29: Chapter 4. Raid

    Attention: All the existing data stored on the selected drives will be erased while the RAID volume is being created. To create RAID volumes: 1. Restart the computer. When the logo screen is displayed, press F1 or Fn+F1. 2. Select Devices ➙ Storage Setup and press Enter. © Copyright Lenovo 2023, 2024...
  • Page 30 4. Select the RAID volumes and press Enter to view the detailed information. Select the storage drives you want to reset to non-RAID and then press Enter. 5. Select Reset to Non-RAID and press Enter. 6. Select Yes to reset the storage drives to non-RAID. ThinkStation P3 Ultra User Guide...

  • Page 31: Chapter 5. Cru Replacement

    If you intend on installing the CRU, Lenovo will ship the CRU to you. CRU information and replacement instructions are shipped with your product and are available from Lenovo at any time upon request. You might be required to return the defective part that is replaced by the CRU.

  • Page 32: System Board

    • Rear USB 3.2 Gen 2x2 Type-C PCI-Express x4 adapter • System fan and heat sink • Thermal heat sink and fan for Type-5 PCI-Express card* * for selected models System board Note: The system board might look slightly different from the illustration. ThinkStation P3 Ultra User Guide...
  • Page 33 Figure 1. System board part locations Item Item Microprocessor Memory slot (SODIMM 1) Memory slot (SODIMM 3) System fan connector Chapter 5 CRU replacement...

  • Page 34: Power Adapter And Power Cord

    Before you start, read Generic Safety and Compliance Notices, and print the following instructions. For access, turn off the computer and remove all connected devices and cables. Removal steps 1. Remove the power adapter. 2. Remove the power cord. ThinkStation P3 Ultra User Guide...

  • Page 35: Dust Filter

    Dust filter Prerequisite Before you start, read Generic Safety and Compliance Notices, and print the following instructions. For access, turn off the computer and remove all cables and devices connected to the front bezel. Removal steps Remove the dust filter. External antenna Prerequisite Before you start, read Generic Safety and Compliance Notices, and print the following instructions.

  • Page 36: Chassis

    Install the antenna. Note: Once the Wi-Fi antenna is installed, you can turn the antenna clockwise or counter-clockwise to 90° maximum. Chassis Prerequisite Before you start, read Generic Safety and Compliance Notices, and print the following instructions. ThinkStation P3 Ultra User Guide...
  • Page 37 Before you remove the chassis, turn off the computer and wait several minutes until the computer is cool. For access, do the following: 1. Turn off the computer and remove all connected devices and cables. 2. Disconnect the computer from ac power and all connected cables. 3.

  • Page 38: M.2 Solid-State Drive Thermal Kit

    1. Remove the power adapter and cord. See “Power adapter and power cord” on page 28. 2. Remove the chassis. See “Chassis” on page 30. 3. Disconnect the power cable from the thermal kit. Removal steps Remove the M.2 solid-state drive thermal kit. ThinkStation P3 Ultra User Guide...

  • Page 39: M.2 Solid-State Drive

    Installation steps Install the M.2 solid-state drive thermal kit. M.2 solid-state drive Prerequisite Before you start, read Generic Safety and Compliance Notices, and print the following instructions. The thermal kit might be very hot. Before you open the chassis, turn off the computer and wait several minutes until the computer is cool.

  • Page 40: 2.5-Inch Hard Disk Drive

    Before you start, read Generic Safety and Compliance Notices, and print the following instructions. Attention: The internal storage drive is sensitive. Inappropriate handling might cause damage and permanent loss of data. When handling the internal storage drive, observe the following guidelines: ThinkStation P3 Ultra User Guide...
  • Page 41 • Replace the internal storage drive only for repair. The internal storage drive is not designed for frequent changes or replacement. • Before replacing the internal storage drive, make a backup copy of all the data that you want to keep. •...
  • Page 42 Installation steps 1. Install the storage drive to the bracket. 2. Install the storage drive bracket. ThinkStation P3 Ultra User Guide...

  • Page 43: Led Cable And Holder

    LED cable and holder Prerequisite Before you start, read Generic Safety and Compliance Notices, and print the following instructions. The LED cable and holder be very hot. Before you open the chassis, turn off the computer and wait several minutes until the computer is cool. For access, do the following: 1.

  • Page 44: System Fan And Its Heat Sink

    2. Remove the LED cable. System fan and its heat sink Prerequisite Before you start, read Generic Safety and Compliance Notices, and print the following instructions. ThinkStation P3 Ultra User Guide...
  • Page 45 The system fan and heat sink be very hot. Before you open the chassis, turn off the computer and wait several minutes until the computer is cool. For access, do the following: 1. Remove the power adapter and cord. See “Power adapter and power cord” on page 28. 2.
  • Page 46 Step Screw (quantity) Color Torque M3 x L17.8 mm, flat-head (4) Bright Ni 3.0±0.1 in-lbs Installation steps: 1. Secure the heat sink screws. ThinkStation P3 Ultra User Guide...
  • Page 47 2. Install the system fan. Torque Step Screw (quantity) Color M3 x L17.8 mm, flat-head (4) Bright Ni 3.0±0.1 in-lbs 125-watt system fan Removal steps: 1. Release the system fan latch and lift the system fan up. Chapter 5 CRU replacement...
  • Page 48 2. Loosen the heat sink screws and remove the heat sink with system fan. Attention: Use the screws provided by Lenovo to avoid any unpredictable damage to your computer. Step Screw (quantity) Color Torque M3 x L17.4 mm, flat-head (4) Bright Ni 3.0±0.1 in-lbs...
  • Page 49 2. Install the system fan. Attention: Use the screws provided by Lenovo to avoid any unpredictable damage to your computer. Step Screw (quantity) Color Torque M3 x L5 mm, countersunk screw (1) Blue Zn 5.0±0.1 in-lbs M3 x L17.4 mm, flat-head (4) Bright Ni 3.0±0.1 in-lbs...

  • Page 50: Memory Module

    • To remove or install the memory module, wait at least 20 seconds after disconnecting power cords from the system. It allows the system to be completely discharged of electricity. • Ensure that you follow the installation order for memory modules shown in the following illustration. ThinkStation P3 Ultra User Guide...
  • Page 51 Type-1 memory module For access, do the following: 1. Remove the power adapter and power cord. See “Power adapter and power cord” on page 28. 2. Remove the chassis. See “Chassis” on page 30. Removal steps: Remove the memory module. Chapter 5 CRU replacement...
  • Page 52 Installation steps: Install the memory module. Type-2 memory module For access, do the following: 1. Remove the power adapter and power cord. See “Power adapter and power cord” on page 28. ThinkStation P3 Ultra User Guide...
  • Page 53 2. Remove the chassis. See “Chassis” on page 30. 3. Disconnect the system fan cable from the system board, and lift the system fan. See “System fan and its heat sink” on page 38. Removal steps: Remove the memory module. Installation steps: Install the memory module.

  • Page 54: Pci-Express Card

    1. Remove the power adapter and cord. See “Power adapter and power cord” on page 28. 2. Remove the chassis. See “Chassis” on page 30. Note: Before installing a new PCI-Express card, remove any PCI-Express connector cables that impede the installation. Type-1 PCI-Express card Removal steps: Remove the PCI-Express card. ThinkStation P3 Ultra User Guide...
  • Page 55 Type-2 PCI-Express card Removal steps: 1. Remove the PCI-Express bracket. 2. Remove the PCI-Express card. Chapter 5 CRU replacement...
  • Page 56 3. Remove the PCI-Express card from the converter. Installation steps: 1. Install the PCI-Express card to the converter. ThinkStation P3 Ultra User Guide...
  • Page 57 2. Install the PCI-Express card. 3. Install the PCI-Express bracket. Chapter 5 CRU replacement...
  • Page 58 Type-3 PCI-Express card Removal steps: 1. Remove the PCI-Express bracket. 2. Remove one screw and remove the PCI-Express card. ThinkStation P3 Ultra User Guide...
  • Page 59 3. Remove the PCI-Express card from the converter. Attention: Use the screws provided by Lenovo to avoid any unpredictable damage to your computer. Torque Step Screw (quantity) Color M3 x L5 mm, countersunk screw (1) Blue Zn 5.0±0.1 in-lbs Installation steps: 1.
  • Page 60 2. Install the PCI-Express card. 3. Install the screw to secure the PCI-Express card on the computer and install the PCI-Express bracket. ThinkStation P3 Ultra User Guide...
  • Page 61 Attention: Use the screws provided by Lenovo to avoid any unpredictable damage to your computer. Step Screw (quantity) Color Torque Blue Zn 5.0±0.1 in-lbs M3 x L5 mm, countersunk screw (1) Type-4 PCI-Express card Removal steps: 1. Remove the PCI-Express card.
  • Page 62 3. Remove the PCI-Express card holder. Attention: Use the screws provided by Lenovo to avoid any unpredictable damage to your computer. Torque Step Screw (quantity) Color M3 x L5 mm, hex screw (2) Black Ni 5.0±0.1 in-lbs Installation steps: 1. Install the PCI-Express card holder.
  • Page 63 2. Install the PCI-Express card converter. 3. Install the PCI-Express card. Chapter 5 CRU replacement...
  • Page 64 4. Use the screws provided by Lenovo to avoid any unpredictable damage to your computer. Torque Step Screw (quantity) Color M3 x L5 mm, hex screw (2) Black Ni 5.0±0.1 in-lbs Type-5 PCI-Express card Removal steps: 1. Lift up the system fan and disconnect the PCI-Express card fan cable.
  • Page 65 3. Remove the PCI-Express card bracket. 4. Remove the PCI-Express card. Chapter 5 CRU replacement...
  • Page 66 5. Remove the MOS heat sink from the PCI-Express card. 6. Remove the thermal heat sink from the PCI-Express card. ThinkStation P3 Ultra User Guide...
  • Page 67 Attention: Use the screws provided by Lenovo to avoid any unpredictable damage to your computer. Step Screw (quantity) Color Torque Black Zn 5.0±0.1 in-lbs M3 x L12 mm (4) Installation steps: 1. Install the thermal heat sink to the PCI-Express card.
  • Page 68 3. Install the PCI-Express card. 4. Install the MOS heat sink to the PCI-Express card, and secure the PCI-Express card with screws. Note: Ensure that the holes on both heat sinks are aligned before installing. ThinkStation P3 Ultra User Guide...
  • Page 69 5. Install the PCI-Express card bracket and restore the PCI-Express card latch. 6. Connect the PCI-Express card fan cable and install the fan. Chapter 5 CRU replacement...
  • Page 70 7. Install the system fan. Attention: Use the screws provided by Lenovo to avoid any unpredictable damage to your computer. Step Screw (quantity) Color Torque M3 x L12 mm (4) Black Zn 5.0±0.1 in-lbs ThinkStation P3 Ultra User Guide...

  • Page 71: Chapter 6. Help And Support

    How to access? • https://www.lenovo.com/tips Troubleshooting and frequently asked questions • https://forums.lenovo.com Accessibility information https://www.lenovo.com/accessibility • Use Lenovo recovery options. 1. Go to https://support.lenovo.com/ HowToCreateLenovoRecovery 2. Follow the on-screen instructions. • Use Windows recovery options. Reset or restore Windows 1. Go to https://pcsupport.lenovo.com...

  • Page 72: Call Lenovo

    • Microsoft support Web site: https://support.microsoft.com Call Lenovo If you have tried to correct the problem yourself and still need help, you can call Lenovo Customer Support Center. Before you contact Lenovo Prepare the following before you contact Lenovo: 1.

  • Page 73: Certification-Related Information

    During the warranty period, you can call Lenovo Customer Support Center for help. Telephone numbers For a list of the Lenovo Support phone numbers for your country or region, go to: https://pcsupport.lenovo.com/supportphonelist Note: Phone numbers are subject to change without notice. If the number for your country or region is not provided, contact your Lenovo reseller or Lenovo marketing representative.

  • Page 74: Purchase Additional Services

    Purchase additional services During and after the warranty period, you can purchase additional services from Lenovo at: https://pcsupport.lenovo.com/warrantyupgrade Service availability and service name might vary by country or region. ThinkStation P3 Ultra User Guide...

  • Page 75: Appendix A. Notices And Trademarks

    Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.
  • Page 76 Actual results may vary. Users of this document should verify the applicable data for their specific environment. This document is copyrighted by Lenovo and is not covered by any open source license, including any Linux agreement(s) which may accompany software included with this product. Lenovo may update this document at any time without notice.

This manual is also suitable for:

F6745

Table of Contents