Related Manuals for VITO VM
Summary of Contents for VITO VM
- Page 1 VITO oil fi lter system VITO VM VL User Manual - Bedienungsanleitung Manual de instrucciones - Manuale d‘istruzione Manuel d‘utilisation - دﻟ�ﻞ اﻻﺳﺘﺨﺪام...
-
Page 2: Table Of Contents
Contents 1. Product 1.1 Product description 1.2 Scope of delivery 2. Legal information 3. Preface 4. Safety instructions 4.1 Explanation of symbols 4.2 Safety instructions 4.3 Intended use 5. Safety functions 5.1 Tilt and vibration protection 5.2 Acoustic signal 5.3 Overtemperature 6. -
Page 3: Product
Copyright © VITO AG info@vito.ag All rights reserved www.vito.ag This document is subject to the copyright of VITO AG. Without previous written permission of the company VITO AG the CEO: document or parts of it may neither be duplicated, nor used in Andreas Schmidt (MBA, Dipl.-Wirt.Ing) -
Page 4: Preface
We hope that you enjoy your VITO oil filter system for a long time and increase the efficiency in your establishment. With VITO you own a high-quality oil filter system from which you can expect a long life and efficient support on the fryer. -
Page 5: Safety Functions
5.1 Tilt and vibration protection If VITO is placed inclined more than 17°, tilts or vibrates too much due to a defect or incorrect placement, VITO will immediately stops off the filtration. The power indicator (1) and the filter indicator (2) flash and a repeating acoustic signal sounds. -
Page 6: Online Programming
2. Open the WiFi settings of your device (tablet, smartphone or PC). 3. Search for the network “VITO Config + Serial number”. The serial number (SN) of the VITO can be found on the type label (16). 4. Connect to the network. -
Page 7: Filtration Process
9. Changing the filter paper Change the filter paper as needed. The change depend on the use of VITO and the degree of contamination of the frying oil. Up to max. 10 filtrations can be achieved with one particle filter. -
Page 8: Cleaning
10. Cleaning 10.1 Notes • Clean the pump-filter unit (11) every time the filter paper is changed. • Clean VITO only when it is cooled down. • DO NOT use abrasive cleaners. • DO NOT use a wire brush or similar. -
Page 9: Trouble Shooting
• Please contact service If you find any faults not listed here, please contact the VITO customer service or your dealer! Contact details can be found in chapter 2. Legal information. 12. Waste disposal 12.1 Packaging disposal •... -
Page 10: Device Disposal (Take-Back Concept For B2B Waste Equipment)
Manufacturers of these devices are obliged to take back products that are no longer usable. VITO AG will comply with the product take back requirements at the end of life of VITO-branded products that are sold into the EU. You can return these products to local collection points. -
Page 11: Declaration Of Conformity
14. Declaration of conformity Issued by VITO AG | Eltastrasse 6 78532 Tuttlingen (Germany) | Phone : +49 (0) 7461 / 96289-0 Fax : +49 (0) 7461 / 96289-12 | Email: info@vito.ag For the product VITO VM & VL: EU Patent No. 1326692 / U.S. Patent No. US7.052.605.B2... - Page 12 Manufacturer VITO AG Eltastr.6, 78532 Tuttlingen P: +49 (0) 7461 / 96289-0 VITO is a registered trademark of ® F: +49 (0) 7461 / 96289-12 VITO AG, Germany. info@vito.ag www.vito.ag Follow us on: #vitofi lter...
Need help?
Do you have a question about the VM and is the answer not in the manual?
Questions and answers