Delay Start - GE GFWH2405MV User Manual

About the washer features.
NOTE: Features may not be available on all washer models.
9
10
11
12
13
14
Extra Rinse
Use an extra rinse when additional rinsing
is desired to remove excess dirt and
detergent from soiled loads.

Delay Start

You can delay the start of a wash cycle
for 10–18 hours, depending on the model.
Press the DELAY START button to choose
the number of hours you want to delay
the start of the cycle, then press the START
button. The machine will count down and
start automatically at the correct time.
Lock
You can lock the controls to prevent any
selections from being made. Or you can
lock the controls after you have started
a cycle.
Children cannot accidentally start
the washer by touching pads with
this option selected.
MY CYCLE
(on some models)
To save a favorite cycle, set the desired
settings for wash cycle, soil level, spin speed
and wash temp settings and hold down the
MY CYCLE button for 3 seconds. A beep will
sound to indicate the cycle has been saved.
To use your custom cycle, press the
MY CYCLE button before washing a load.
To change the saved cycle, set the
desired settings and hold down the MY
CYCLE button for 3 seconds.
ENERGY SAVINGS WASH
models)
Use "e" WASH to save energy on
specified wash cycles. "e" WASH cannot
be used with STEAM REFRESH, STAIN
WASH and BASKET WASH.
STEAM ASSIST
(on some models)
STEAM ASSIST adds steam into the
washer during WHITES/HEAVY DUTY,
COLORS/NORMAL, STAIN WASH or
ACTIVE WEAR cycles.
To use:
1. Turn power ON and select a wash
cycle.
NOTE: If you forget to fully close the door,
a reminder signal will beep reminding you
to do so.
NOTE: If you open the door when the delay
is counting down, the machine will enter
the pause state. You must close the door
and press START again in order to restart
the countdown.
To lock the washer, press and hold
the LOCK button for 3 seconds.
To unlock the washer controls, press
and hold the LOCK button for
3 seconds.
The control lock icon on the display will
light up when it is on.
NOTE: The POWER button can still be
used when the machine is locked.
NOTE: When using MY CYCLE, wash
options cannot be modified after the
cycle has been started.
NOTE: If you change wash options with
MY CYCLE before starting the cycle, the
MY CYCLE light will turn off and you will
be returned to the base cycle.
(on some
The STEAM ASSIST option is only
available on WHITES/HEAVY DUTY,
COLORS/NORMAL, STAIN WASH,
ACTIVE WEAR or EASY CARE cycles.
2. Select the STEAM ASSIST button to
activate Steam.
3. Press the START/PAUSE button.
GEAppliances.com
7