Related Manuals for OneScreen Wandr
Summary of Contents for OneScreen Wandr
- Page 1 I n s t a l l a t i o n G u i d e To ensure proper use of the product, please read this Installation Guide carefully. onescreensolutions.com/wandr | (+1) (855) 626-8833 | wandrsupport@onescreensolutions.com...
-
Page 2: What's Inside
ONESCREEN WANDR INSTALLATION GUIDE What’s Inside Wandr display screen Base Installation Guide Mounting Pole Installation Guide (with back plate covering) Power cord Power adapter Screws Battery Remote control (optional) -
Page 3: Installation Instructions
During daily use, please grab the middle of the mounting pole and ensure that Wandr moves in upright position. Do not tilt Wandr as it increases the risk of the device toppling over which may cause personal injury or product damage... - Page 4 ONESCREEN WANDR INSTALLATION GUIDE Installation of Base and Mounting Pole 1. Unpack and take out the inner packing 2. Take out the base and the lifter foam 3. Put the inner packing foam back in the 4. Place the base in the slot of the packaging original position 5.
- Page 5 ONESCREEN WANDR INSTALLATION GUIDE Installation of Wandr 1. Tilt display screen upward. Aim it at the 2. Rotate Wandr 90°, then wind power coble support rod and install around the lifiting rod clockwise, clamp power cable into buckle 1, then insert power cable plug, finall arrange power cable and clamp it into buckle 2.
- Page 6 7.5” ±0.4” Caution • Do not rotate Wandr at an angle beyond the limit or beyond the maximum adjustable range of height • Do not let your hands or fingers get stuck in the stand or height adjustment area...
-
Page 7: Camera Installation
ONESCREEN WANDR INSTALLATION GUIDE Camera Installation You can simply plug-in the camera through the type-C port on the top-center of OneScreen Wandr to use it, as shown in the illustration below. Type-C Port for Camera... -
Page 8: Connection Of Peripherals
Connects to an external camera. Attention: • While turning on Wandr for the first time, connect the power adapter first so that the product can be turned on normally • Connect Wandr to the power adapter first, then insert the power... -
Page 9: Functions Of Keys
At this moment, it enters the auto pairing state. Keep a distance of less than 8 inches between the remote control and Wandr, and wait for the screen to show the “pairing successful” prompt... - Page 10 ONESCREEN WANDR INSTALLATION GUIDE Description of Control Keys on the Remote Control In standby mode, press key to turn on the product. During normal working, press this key to put the device on standby mode. Switch the input source Enable or disable the mouse function...
-
Page 11: Basic Operations
Basic Operations Power-on/Standby Connect the power cord, and press the [ON/OFF] key on the base to turn on Wandr. In power-on state, press the key on the rear shell, then the screen will show the auxiliary menus. Press now and the product will enter standby. - Page 12 1. Connect your personal device and Wandr through an HDMI cable using the HDMI port on the backside of Wandr 2. Once you have connected your device to Wandr, tap on the HDMI Icon on the Home Page to view your device’s shared screen Wireless Connectivity –...
- Page 13 4. On the client device, you will see a list of available devices to connect. Tap on the name that you see on the EShare app on Wandr to connect your personal device to the screen 5. You can use Screen Share to project the client device’s display on Wandr or use Screen Mirror to mirror Wandr’s display on the client device...
- Page 14 ONESCREEN WANDR INSTALLATION GUIDE Support OneScreen provides 24/5 free online help and support through the OneScreen Guru service. To reach out to our team of experts and engineers, please contact us at wandrsupport@onescreensolutions.com or at our helpline (+1) (855) 626-8833.
Need help?
Do you have a question about the Wandr and is the answer not in the manual?
Questions and answers