This manual is believed to be complete and accurate at the time of publication. In no event shall Merck KGaA, Darmstadt, Germany be liable for incidental or consequential damages in connection with, or arising from, the use of...
Introduction The EZ-Stream Pump is a compact, service-free pump that provides a consistent source of vacuum for filtration ® of liquids and gasses for laboratory applications. The EZ-Stream Pump is intended for microbiological testing with membrane filtration; typically, for water or ®...
System Components • EZ-Stream Pump ® • External power supply • Four power cords (Europe, USA/Japan, Switzerland, Great Britain) Power outlet On/off tactile button (Top of pump) Outlet hose barb Inlet hose barb Protective caps Installing the EZ-Stream Pump ® 1.
Page 6
NOTE: The hose length between the filtration equipment and the pump should be as short as possible. 7. Make electrical connections: • Connect the external power supply cord to the power outlet. • Connect the external power supply to the appropriate power cord. Power outlet External power supply Power cord...
Using the EZ-Stream Pump ® The EZ-Stream Pump is shipped ready for use. See the Specifications and Safety sections of this user guide for ® required operating conditions. 1. Ensure that the EZ-Stream Pump is installed according to the instructions in the Installing the EZ-Stream ®...
Maintenance Cleaning the Exterior of the EZ-Stream Pump ® Clean the exterior surface of the EZ-Stream Pump with a non-woven wipe soaked in one of the products listed in ® this table: Active ingredient Dilution Quaternary ammonium (NH Biguanide Ready to use Propanolol (10 to 40%) Isopropyl alcohol 70% Ready to use...
Need help?
Do you have a question about the Milipore EZ-Stream and is the answer not in the manual?
Questions and answers