Read this manual before using the product. Product appearance is for reference only and may differ from the actual product. Symbols and Marks i. Not necessarily included accessory. ii. Variable accessory Warning amount. iii. Skip this step if not required. Correct MicroSD card Incorrect...
Page 4
A Interface Camera: ① Network interface: For network debugging only. Disconnect the interface after debugging. ② Power input interface: Connect it with ⑤ or ⑥ for camera power input. Solar-powered supply system: ③ Solar panel power output interface: Connect it with ④ for battery power supply. ④...
Page 5
B Camera Indicator Indicator: ① Solid red: The camera is powering up. ② Fast-flashing red: Memory card exception or other exceptions, such as the temperature sensor exception. ③ Slow-flashing red (1): The camera is not activated and not connected to the network. The frequency is approximately on for 2 seconds, off for 2 seconds.
Page 6
C MicroSD Card and SIM Card Installation...
Page 7
D Solar-Powered Supply System Installation D.1 Wall Mount...
Page 12
F Camera: Angle Adjustment F.1 View Adjustment F.2 Antenna and Radar Adjustment Note: The adjustable angle varies with the models. For the rader detection angle, please refer to the product datasheet for details.
Need help?
Do you have a question about the DS-2DE2C400IWG-K/4G/C05S10(2.8mm) and is the answer not in the manual?
Questions and answers