Tv Screen Display Mode; Sleep Timer - Sylvania LC200SL8 A Owner's Manual

W
ATCHING TV

TV Screen Display Mode

DTV
2 types of display modes can be selected in the digital mode when the
broadcasting station is sending 16:9 video signal.
Press [SCREEN MODE] repeatedly to switch the TV
aspect ratio.
LETTERBOX
[LETTERBOX]
Display the digital-supported program in full-screen.
Black borders will spread in the upper and lower
screen.
[ZOOM]
Enlarge and display the center area of the digital-
supported program.
The right and left side of image will be cut off.
Note:
• You may not switch the display mode depending on the
program.
18
EN
The sleep timer can be set to automatically turn off the unit after an
incremental period of time.
1
2
ZOOM

Sleep Timer

Press [SLEEP] to set the sleep timer.
• Sleep timer display appears on the TV screen.
Press [SLEEP] repeatedly to change the amount of
time until shut off.
• You can set your unit to turn off after a set period of
time (from 30 to 120 minutes).
• Each press of [SLEEP] will increase the time by 30
minutes.
• After set up, the sleep timer display can be called up
for checking by pressing [SLEEP].
To Cancel the Sleep Timer
Press [SLEEP] repeatedly until "SLEEP OFF" is displayed
on the TV screen.
Note:
• The sleep timer setting display will automatically disappear
in 10 seconds.
• When you disconnect the unit from the AC outlet or when a
power failure occurs, the sleep timer setting will be canceled.
SLEEP OFF
SLEEP 120MIN.