Asus AAEON BOXER-6640M User Manual
  1. Manuals
  2. Brands
  3. Asus Manuals
  4. Desktop
  5. Aaeon BOXER-6639M
  6. User manual
Asus AAEON BOXER-6640M User Manual

Asus AAEON BOXER-6640M User Manual

Fanless embedded box pc
Hide thumbs Also See for AAEON BOXER-6640M:
Table of Contents

Advertisement

Quick Links

Download this manual
All manuals and user guides at all-guides.com
BOXER-6640M
Fanless Embedded Box PC
User's Manual 2
nd
Ed
Last Updated: October 18, 2017

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AAEON BOXER-6640M and is the answer not in the manual?

Questions and answers

Related Manuals for Asus AAEON BOXER-6640M

Summary of Contents for Asus AAEON BOXER-6640M

  • Page 1 All manuals and user guides at all-guides.com BOXER-6640M Fanless Embedded Box PC User’s Manual 2 Last Updated: October 18, 2017...

  • Page 2: Copyright Notice

    All manuals and user guides at all-guides.com Copyright Notice This document is copyrighted, 2017. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer.
  • Page 3 All manuals and user guides at all-guides.com Acknowledgement All other products’ name or trademarks are properties of their respective owners. Microsoft Windows is a registered trademark of Microsoft Corp. ®  Intel ® , Platium ® , Celeron ® , and Xeon ®...
  • Page 4 All manuals and user guides at all-guides.com Packing List Before setting up your product, please make sure the following items have been shipped: Item Quantity BOXER-6640M  Wallmount bracket  Screw Package  Thermal Pad  Phoenix power connector  Product DVD with User’s Manual (in pdf) and drivers ...

  • Page 5: About This Document

    All manuals and user guides at all-guides.com About this Document This User’s Manual contains all the essential information, such as detailed descriptions and explanations on the product’s hardware and software features (if any), its specifications, dimensions, jumper/connector settings/definitions, and driver installation instructions (if any), to facilitate users in setting up their product.

  • Page 6: Safety Precautions

    All manuals and user guides at all-guides.com Safety Precautions Please read the following safety instructions carefully. It is advised that you keep this manual for future references All cautions and warnings on the device should be noted. Make sure the power source matches the power rating of the device. Position the power cord so that people cannot step on it.
  • Page 7 All manuals and user guides at all-guides.com If any of the following situations arises, please the contact our service personnel: Damaged power cord or plug Liquid intrusion to the device iii. Exposure to moisture Device is not working as expected or in a manner as described in this manual The device is dropped or damaged Any obvious signs of damage displayed on the device...
  • Page 8 All manuals and user guides at all-guides.com FCC Statement This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
  • Page 9 All manuals and user guides at all-guides.com China RoHS Requirements (CN) 产品中有毒有害物质或元素名称及含量 AAEON Embedded Box PC/ Industrial System 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) 印刷电路板 ○ ○ ○ ○ ○ ○ 及其电子组件 外部信号...
  • Page 10 All manuals and user guides at all-guides.com China RoHS Requirement (EN) Poisonous or Hazardous Substances or Elements in Products AAEON Embedded Box PC/ Industrial System Poisonous or Hazardous Substances or Elements Hexavalent Polybrominated Polybrominated Component Lead Mercury Cadmium Chromium Biphenyls Diphenyl Ethers (Pb) (Hg)

  • Page 11: Table Of Contents

    All manuals and user guides at all-guides.com Table of Contents Chapter 1 - Product Specifications ..................1 Specifications ......................2 Chapter 2 – Hardware Information ..................5 Dimensions ......................6 2.1.1 I/O Location ..................... 9 Jumpers and Connectors ..................10 List of Jumpers ......................
  • Page 12 All manuals and user guides at all-guides.com Setup Submenu: Main ..................29 Setup Submenu: Advanced ................30 3.4.1 Advanced: CPU Configuration ................31 3.4.2 Advanced: Trusted Computing ................32 3.4.3 Advanced: SATA Configuration ................33 3.4.4 Advanced: PCH-FW Configuration ..............34 3.4.5 Advanced: SIO Configuration ................

  • Page 13: Chapter 1 - Product Specifications

    All manuals and user guides at all-guides.com Chapter 1 Chapter 1 - Product Specifications...

  • Page 14: Specifications

    All manuals and user guides at all-guides.com Specifications System 7th Generation Intel® Core™ Processor family, TDP Processor  35W: Intel® Core™ i7-7700T, 2.9 GHz Intel® Core™ i5-7500T, 2.8 GHz Intel® Core™ i3-7101TE, 3.4 GHz Intel® Pentium® G4560T, 2.9 GHz 6th Generation Intel® Core™ Processor family, TDP 35W: Intel®...
  • Page 15 All manuals and user guides at all-guides.com USB 2.0 x 2 2-Pin Remote Power On/Off Connector Remote I/O  Power LED x 1 LED Indicator  Hard Disk Active LED x 1 Full-size Mini-Card x 2 Expansion Slot  SIM Slot x 1 (for PCIE1) 7th Generation Intel®...

  • Page 16: Power Supply

    All manuals and user guides at all-guides.com Gross Weight  5.9 kg (13.0 lb) Net Weight  4.5 kg (8.8 lb) Environmental Ambient with Airflow Operating Temperature  -20°C ~ 50°C (according to IEC68-2-14 with 0.5 m/s AirFlow ; with industrial devices) Storage Temperature ...

  • Page 17: Chapter 2 - Hardware Information

    All manuals and user guides at all-guides.com Chapter 2 Chapter 2 – Hardware Information...

  • Page 18: Dimensions

    All manuals and user guides at all-guides.com Dimensions Chapter 2 – Hardware Information...
  • Page 19 All manuals and user guides at all-guides.com Chapter 2 – Hardware Information...
  • Page 20 All manuals and user guides at all-guides.com Chapter 2 – Hardware Information...

  • Page 21: I/O Location

    All manuals and user guides at all-guides.com 2.1.1 I/O Location Chapter 2 – Hardware Information...

  • Page 22: Jumpers And Connectors

    All manuals and user guides at all-guides.com Jumpers and Connectors Chapter 2 – Hardware Information...

  • Page 23: List Of Jumpers

    All manuals and user guides at all-guides.com List of Jumpers Please refer to the table below for all of the system’s jumpers that you can configure for your application. Label Function JP19 AT/ATX mode select JP24 Clear CMOS 2.3.1 Setting Jumpers You configure your card to match the needs of your application by setting jumpers.

  • Page 24: List Of Connectors

    All manuals and user guides at all-guides.com List of Connectors Please refer to the table below for all of the system’s connectors that you can configure for your application Label Function CRT port DC-IN HDMI1connector HDMI2 connector SPI ROM connector CN14 Dual stack USB (3.0/2.0) + LAN CN15...
  • Page 25 All manuals and user guides at all-guides.com PCIE1 Minicard connector PCIE2 Minicard connector SIM1 SIM card connector Chapter 2 – Hardware Information...

  • Page 26: Clear Cmos (Jp24)

    All manuals and user guides at all-guides.com 2.4.1 Clear CMOS (JP24) Normal (Default) Clear CMOS Function Normal (Default) Clear CMOS 2.4.2 Auto Power Button (JP19) Disable Enable (Default) Function ATX (Default) Chapter 2 – Hardware Information...

  • Page 27: Pcie1/ Pcie2) Mini Card Connector With On Board Sim

    All manuals and user guides at all-guides.com 2.4.3 (PCIE1/ PCIE2) Mini Card Connector With on board SIM Signal Signal PCIE_WAKE# +V3.3A +1.5V PCIE_CLK_REQ# UIM_PWR UIM_DATA PCIE_REF_CLK- UIM_CLK PCIE_REF_CLK+ UIM_RST UIM_VPP W_DISABLE# PCIE_RST# PCIE_RX- +V3.3A PCIE_RX+ +1.5V SMB_CLK PCIE_TX- PCIE_TX- SMB_DATA PCIE_TX+ USB_D- USB_D+...

  • Page 28: Sata1) Sata Port

    All manuals and user guides at all-guides.com Signal Signal +V3.3A +1.5V +V3.3A 2.4.4 (SATA1) SATA Port Signal Signal SATA_TX+ DIFF SATA_TX- DIFF SATA_RX- DIFF SATA_RX+ DIFF Chapter 2 – Hardware Information...

  • Page 29: Pwr1) Sata Pwr Port

    All manuals and user guides at all-guides.com 2.4.5 (PWR1) SATA PWR Port Pin Name Level +12V 2.4.6 LAN + USB 3.0 (CN14/ CN15/ CN16) Signal Signal MDI0+ MDI0- Chapter 2 – Hardware Information...

  • Page 30: Vga Port

    All manuals and user guides at all-guides.com Signal Signal MDI1+ MDI2+ MDI2- MDI1- MDI3+ MDI3- VBUS_1 VBUS_2 (A)D- (B)D- (A)D+ (B)D+ (A)SSRX- (B)SSRX- (A)SSRX+ (B)SSRX+ (A)SSTX- (B)SSTX- (A)SSTX+ (B)SSTX+ 2.4.7 VGA port Signal Signal Green Blue VGA_VCC DDC_DATA VGA_HSYNC VGA_VSYNC Chapter 2 –...

  • Page 31: Dc-In (Cn2)

    All manuals and user guides at all-guides.com Signal Signal DDC_CLK 2.4.8 DC-IN (CN2) Signal Signal PWR_IN 2.4.9 HDMI port (CN3/ CN4) Signal Signal HDMI_DATA2_P HDMI_DATA2_N HDMI_DATA1_P HDMI_DATA1_N HDMI_DATA0_P HDMI_DATA0_N HDMI_CLK_P HDMI_CLK_N HDMI_SCL HDMI_SDA HDMI_PWR HDMI_HDP Chapter 2 – Hardware Information...

  • Page 32: Remote Switch Connector(Cn20)

    All manuals and user guides at all-guides.com 2.4.10 Remote switch connector(CN20) Pin Name Pin Name PANSWH# Chapter 2 – Hardware Information...

  • Page 33: Com Port (Cn30)

    All manuals and user guides at all-guides.com 2.4.11 COM Port (CN30) RS-232 RS422 RS-485 DATA- DATA+ Chapter 2 – Hardware Information...

  • Page 34: Cpu Installation

    All manuals and user guides at all-guides.com CPU Installation Step 1: Turn off the system, unplug the power cord and make sure the system is off. Step 2: Have Intel KabyLake FCLGA1151 Processor (Max. TDP 35W) ready. Step 3: Install the CPU into the socket and place the thermal pad onto it. Chapter 2 –...

  • Page 35: Ddr4 Memory Module Installation

    All manuals and user guides at all-guides.com DDR4 Memory Module Installation Turn off the system, unplug the power cord to make sure the system is powered  off. Step 1: Remove the screws as instructed below and remove the heatsink. Chapter 2 –...
  • Page 36 All manuals and user guides at all-guides.com Step 2: Place the thermal pads onto the RAM modules as instructed below. Chapter 2 – Hardware Information...

  • Page 37: Sata Drive Installation

    All manuals and user guides at all-guides.com 2.5” SATA Drive Installation Turn off the system, unplug the power cord to make sure the system is powered off. Use the HDD screws provided to assemble 2.5” SATA drive with the HDD Bracket. Chapter 2 –...

  • Page 38: Chapter 3 - Ami Bios Setup

    All manuals and user guides at all-guides.com Chapter 3 Chapter 3 - AMI BIOS Setup...

  • Page 39: System Test And Initialization

    All manuals and user guides at all-guides.com System Test and Initialization The system uses certain routines to perform testing and initialization. If an error, fatal or non-fatal, is encountered, a few short beeps or an error message will be outputted. The board can usually continue the boot up sequence with non-fatal errors.

  • Page 40: Ami Bios Setup

    All manuals and user guides at all-guides.com AMI BIOS Setup The AMI BIOS ROM has a pre-installed Setup program that allows users to modify basic system configurations, which is stored in the battery-backed CMOS RAM and BIOS NVRAM so that the information is retained when the power is turned off. To enter BIOS Setup, press <Del>...

  • Page 41: Setup Submenu: Main

    All manuals and user guides at all-guides.com Setup Submenu: Main Chapter 3 – AMI BIOS Setup...

  • Page 42: Setup Submenu: Advanced

    All manuals and user guides at all-guides.com Setup Submenu: Advanced Chapter 3 – AMI BIOS Setup...

  • Page 43: Advanced: Cpu Configuration

    All manuals and user guides at all-guides.com 3.4.1 Advanced: CPU Configuration Options summary: Hyper-Threading Disabled Enabled Optimal Default, Failsafe Default Enabled for Windows XP and Linux (OS optimized for Hyper-Threading Technology) and Disabled for other OS (OS not optimized for Hyper-Threading Technology). When Disabled only one thread per enabled core is enabled.

  • Page 44: Advanced: Trusted Computing

    All manuals and user guides at all-guides.com 3.4.2 Advanced: Trusted Computing Options summary: Security Device Enable Optimal Default, Failsafe Default Support Disable Enable or Disable SATA BIOS support for security device. O.S. will not show Security Device. TCG EFI protocol and INT1A interface will not be available. Chapter 3 –...

  • Page 45: Advanced: Sata Configuration

    All manuals and user guides at all-guides.com 3.4.3 Advanced: SATA Configuration Options summary: SATA Controller(s) Enabled Optimal Default, Failsafe Default Disabled Enable or Disable SATA Device. SATA Mode IDE Mode Selection AHCI Mode Optimal Default, Failsafe Default Determines how SATA controller(s) operate. SATA Port Enabled Optimal Default, Failsafe Default...

  • Page 46: Advanced: Pch-Fw Configuration

    All manuals and user guides at all-guides.com 3.4.4 Advanced: PCH-FW Configuration Chapter 3 – AMI BIOS Setup...
  • Page 47 All manuals and user guides at all-guides.com Options summary: ME FW Image Re-Flash Enabled Disabled Optimal Default, Failsafe Default Enable or Disable ME FW Image Re-Flash function. Chapter 3 – AMI BIOS Setup...

  • Page 48: Advanced: Sio Configuration

    All manuals and user guides at all-guides.com 3.4.5 Advanced: SIO Configuration Chapter 3 – AMI BIOS Setup...

  • Page 49: Sio Configuration: Serial Port Configuration

    All manuals and user guides at all-guides.com 3.4.5.1 SIO Configuration: Serial Port Configuration Options summary: Use This Disabled Device Enabled Optimal Default, Failsafe Default Enable or Disable this Logical Device. Possible: Use Automatic Settings Optimal Default, Failsafe Default IO=2F8; IRQ=3; IO=3F8;...

  • Page 50: Advanced: Hardware Monitor

    All manuals and user guides at all-guides.com 3.4.6 Advanced: Hardware Monitor Chapter 3 – AMI BIOS Setup...

  • Page 51: Advanced: Usb Configuration

    All manuals and user guides at all-guides.com 3.4.7 Advanced: USB Configuration Options summary: Legacy USB Support Enabled Optimal Default, Failsafe Default Disabled Auto Enables Legacy USB support. AUTO option disables legacy support if no USB devices are connected. DISABLE option will keep USB devices available only for EFI applications. Chapter 3 –...

  • Page 52: Advanced: Power Management

    All manuals and user guides at all-guides.com 3.4.8 Advanced: Power Management Options summary: Power Mode ATX Type Optimal Default, Failsafe Default AT Type Select power supply mode. Restore AC Power Last State Optimal Default, Failsafe Default Loss Power On Power Off Select power state when power is re-applied after a power failure.

  • Page 53: Setup Submenu: Chipset

    All manuals and user guides at all-guides.com Setup submenu: Chipset Chapter 3 – AMI BIOS Setup...

  • Page 54: Chipset: System Agent (Sa) Configuration

    All manuals and user guides at all-guides.com 3.5.1 Chipset: System Agent (SA) Configuration Chapter 3 – AMI BIOS Setup...

  • Page 55: System Agent (Sa) Configuration: Graphics Configuration

    All manuals and user guides at all-guides.com 3.5.1.1 System Agent (SA) Configuration: Graphics Configuration Options summary: Primary Display Auto Optimal Default, Failsafe Default IGFX Select which of IGFX/PEG/PCI Graphics device should be Primary Display Or select SG for switchable Gfx. Primary IGFX Boot VBIOS default Optimal Default, Failsafe Default...

  • Page 56: Chipset: Pch-Io Configuration

    All manuals and user guides at all-guides.com 3.5.2 Chipset: PCH-IO Configuration Options summary: HD Audio Disabled Enabled Auto Optimal Default, Failsafe Default Control Detection of the HD-Audio device. Disabled = HDA will be unconditionally disabled Enabled = HDA will be unconditionally enabled Auto = HDA will be enabled if present, disabled otherwise.

  • Page 57: Setup Submenu: Security

    All manuals and user guides at all-guides.com Setup submenu: Security Change User/Administrator Password You can set a User Password once an Administrator Password is set. The password will be required during boot up, or when the user enters the Setup utility. Please Note that a User Password does not provide access to many of the features in the Setup utility.

  • Page 58: Setup Submenu: Boot

    All manuals and user guides at all-guides.com Setup submenu: Boot Options summary: Quiet Boot Disabled Enabled Optimal Default, Failsafe Default Enables or disables Quiet Boot option. Launch PXE ROM Disabled Optimal Default, Failsafe Default Enabled Controls the execution of UEFI and Legacy PXE ROM. Chapter 3 –...

  • Page 59: Setup Submenu: Save & Exit

    All manuals and user guides at all-guides.com Setup submenu: Save & Exit Chapter 3 – AMI BIOS Setup...

  • Page 60: Chapter 4 - Drivers Installation

    All manuals and user guides at all-guides.com Chapter 4 Chapter 4 – Drivers Installation...

  • Page 61: Product Cd/Dvd

    All manuals and user guides at all-guides.com Product CD/DVD The BOXER-6640M comes with a product DVD that contains all the drivers and utilities you need to setup your product. Insert the DVD and follow the steps in the autorun program to install the drivers. In case the program does not start, follow the sequence below to install the drivers.
  • Page 62 All manuals and user guides at all-guides.com Step 4 – Install Audio Driver Open the Step4 - Audio folder and select your OS followed by the .exe file in the folder Follow the instructions Drivers will be installed automatically Step 5 – Install USB3.0 Driver Open the Step5 –...

  • Page 63: Appendix A - Watchdog Timer Programming

    All manuals and user guides at all-guides.com Appendix A Appendix A - Watchdog Timer Programming...

  • Page 64: Watchdog Timer Initial Program

    All manuals and user guides at all-guides.com Watchdog Timer Initial Program Table 1 : SuperIO relative register table Default Value Note SIO MB PnP Mode Index Register Index 0x2E(Note1) 0x2E or 0x4E SIO MB PnP Mode Data Register Data 0x2F(Note2) 0x2F or 0x4F Table 2 : Watchdog relative register table Register...

  • Page 65: Appendix A - Watchdog Timer Programming

    All manuals and user guides at all-guides.com ************************************************************************************ // SuperIO relative definition (Please reference to Table 1) #define byte SIOIndex //This parameter is represented from Note1 #define byte SIOData //This parameter is represented from Note2 #define void IOWriteByte(byte IOPort, byte Value); #define byte IOReadByte(byte IOPort);...
  • Page 66 All manuals and user guides at all-guides.com ********************************************************************************* VOID Main(){ // Procedure : AaeonWDTConfig // (byte)Timer : Time of WDT timer.(0x00~0xFF) // (boolean)Unit : Select time unit(0: second, 1: minute). AaeonWDTConfig(); // Procedure : AaeonWDTEnable // This procudure will enable the WDT counting. AaeonWDTEnable();...
  • Page 67 All manuals and user guides at all-guides.com ********************************************************************************* // Procedure : AaeonWDTEnable VOID AaeonWDTEnable (){ WDTEnableDisable(EnableLDN, EnableReg, EnableBit, 1); // Procedure : AaeonWDTConfig VOID AaeonWDTConfig (){ // Disable WDT counting WDTEnableDisable(EnableLDN, EnableReg, EnableBit, 0); // Clear Watchdog Timeout Status WDTClearTimeoutStatus(); // WDT relative parameter setting WDTParameterSetting();...
  • Page 68 All manuals and user guides at all-guides.com ********************************************************************************* VOID SIOEnterMBPnPMode(){ IOWriteByte(SIOIndex, 0x87); IOWriteByte(SIOIndex, 0x87); VOID SIOExitMBPnPMode(){ IOWriteByte(SIOIndex, 0xAA); VOID SIOSelectLDN(byte LDN){ IOWriteByte(SIOIndex, 0x07); // SIO LDN Register Offset = 0x07 IOWriteByte(SIOData, LDN); VOID SIOBitSet(byte LDN, byte Register, byte BitNum, byte Value){ Byte TmpValue;...

  • Page 69: Appendix B - I/O Information

    All manuals and user guides at all-guides.com Appendix B Appendix B - I/O Information...

  • Page 70: I/O Address Map

    All manuals and user guides at all-guides.com I/O Address Map Appendix B – I/O Information...
  • Page 71 All manuals and user guides at all-guides.com Appendix B – I/O Information...

  • Page 72: Memory Address Map

    All manuals and user guides at all-guides.com Memory Address Map Appendix B – I/O Information...
  • Page 73 All manuals and user guides at all-guides.com Appendix B – I/O Information...

  • Page 74: Irq Mapping Chart

    All manuals and user guides at all-guides.com IRQ Mapping Chart Appendix B – I/O Information...

Table of Contents