Advertisement
Quick Links
Installation Instructions
I-93317 Rev A
97-06 Jeep Wrangler TJ
California Brief Top
For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-328-2409.
Pre-Installation Requirements
For correct installation, mounting surface of part should be between 70-95° F (21-35° C) prior to installation
Remove existing hard or soft top. For OEM (original/factory) soft tops, also remove: Windshield header channel, Tube
hardware, side door surrounds can be used if wanted. Brief Top works with or with out door surrounds.
Important Notes
Installation requires an aftermarket Windshield Channel (Rampage Products Part # 901004)
Installation Steps
1. Locate the rubber blade on front edge.
2. Place the Brief on top of Jeep. Insert rubber blade into Windshield Channel, working from one side of
vehicle to the other.
Page 1 of 3
Advertisement
Related Manuals for Rampage Products California Brief Top
Summary of Contents for Rampage Products California Brief Top
- Page 1 Brief Top works with or with out door surrounds. Important Notes Installation requires an aftermarket Windshield Channel (Rampage Products Part # 901004) Installation Steps 1. Locate the rubber blade on front edge.
- Page 2 I-93317 Rev A 3. Locate 2 Velcro straps in each front corner of the Brief. • Wrap Strap A over the top of the bar towards the inside of the vehicle. The Velcro of Strap A should be facing outward from the roll bar. •...
- Page 3 Do not use cleaning solvents of any kind. Congratulations! Your new California Brief Top™ is installed! Now go enjoy the ride. Thank you for purchasing one of the many quality Rampage® products offered by Lund International, Inc. We take the ultimate pride in our products and hope you receive years of satisfaction from your investment.
Need help?
Do you have a question about the California Brief Top and is the answer not in the manual?
Questions and answers