Using Express Setup - Cisco WS-CBS3120X-S Hardware Installation Manual

Using the Onboard Administrator to Assign an IP Address to the Switch Module and Running Express Setup
Figure 2-5
Click the IP address hyperlink for the switch module from the Management URL column to open a new
Step 6
browser window.
On the left side of the Onboard Administrator, choose Configuration > Express Setup.
Step 7
The Express Setup page appears (see
window.)
Figure 2-6
Go to
Step 8
Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide
2-10
Onboard Administrator Interconnect Bay Summary Window
Express Setup Page
"Using Express Setup" section on page 2-11
Figure 2-6). (Close or minimize the Device Manager Help
to finish setting up the switch module.
Chapter 2 Switch Installation
OL-12246-01