Sony TC-K333ESL Service Manual

TC-K333ESL/K970ES
~ SERVICE MANUAL | AEP Model
TC-K97OES
E Model
TC-K333ESL
* Dolby noise reduction and HX Pro headroom extension manufactured
under license from Dolby Laboratories Licensing Corporation. HX Pro
originated by Bang & Olufsen.
"DOLBY", the double-D symbol! O0 and "HX PRO" are trademarks of Dolby
Laboratories Licensing Corporation.
Model Name Using Similar Mechanism TC- K333ESG
Tape Transport Mechanism Type TCM - 200D4
SPECIFICATIONS
Recording system 4-track 2-channel stereo Inputs
Se winding time vate 90 sec. (with Sony C-60 cassette) Line inputs 77.5 mV
Heads . Erasing head x 1 (S&F head) (phono jacks) Input impedance | 47 k ohms
Recording head x 1 (LA head)
Playback head x 1 (LA head)
Motors Capstan motor x 1
(direct-drive linear torque BSL motor)
Reel motor x 1 (DC motor)
DC motor x 1
Signal-to-noise ratio (at peak level)
Dolby NR switch
OFF B-Type ON | C-Type ON
Type IV
Type Il (Sony UX)
Type | (Sony HF-S)
Dimensions Approx. 470 x 140 x 380 mm (w/h/d)
Type IV cassette 15 - 22,000 Hz (+3 dB,IEC) Weight Approx. 12.0 kg (17 Ibs 7 oz)
(Sony METAL-S) 15 - 16,000 Hz [+3 dB OVU(-4dB)recording] Model for other countries: Approx. 11.2 kg
Supplied accessory Audio connecting cord (2)
Type Il cassette (Sony) 45 99 900 Hz (43 dB,IEC) |
UX-S)
Type | cassette 15 - 18,000 Hz (+3 dB,IEC
Screws(8)
Wow and flutter +0.04% W.Peak (IEC)
Wireless remoto control unit*
Sony R6 (Size-AA) batteries (2)*
0.024% WRMS (NAB)
+0.065% W.Peak (DIN)
CD DIRECT INPUT | Input impedance
Outputs
Line outputs
(phono jacks)
0,44 V at a load
impedance of
47 k ohms
Loadimpedance | Over 10 k ohms
Phones Output level 0- 2,5 mW ata load
(stereo phone jack) impedance of 32 ohms
General
Power requirements 120-220-240V AC, 50/60Hz (AEP, Germany)
220- 230V AC, 50/60Hz (E)
Power consumption 31 W
Rated output level
a
*Not supplied with model for AEP countrries
Design and specifications subject to change without notice.
STEREO CASSETTE DECK
SONY.