Configuration Operations; Additional Configuration Options Using Xml - Cisco CRS-1 - Carrier Routing System Router Api Manual

Configuration Operations

be promoted (that is, committed) to the running configuration explicitly by the client application in order
to replace or become the running configuration. If the client session breaks, the current target
configuration will be aborted and any outstanding locks will be released.
Only the syntax of the target configuration is checked and verified to be compatible with the installed
Note
software image on the router. The semantics of the target configuration is checked only when the target
configuration is promoted to the running configuration.
Configuration Operations
Use the following configuration options from the client application to configure or modify the Cisco
CRS-1 Series router with XML:
Only the tasks in the
Note
Configuration"
committing the target configuration).
•
•
•
•
•
•
•
•
•
•
Each of these options are described in the following sections.

Additional Configuration Options Using XML

Several additional, optional configuration tasks are available to the client application for configuring or
modifying the Cisco CRS-1 Series router with XML:
•
•
•
•
•
•
Cisco CRS-1 Series Carrier Routing System XML API Guide
2-26
"Modifying the Target Configuration"
section are required to change the configuration on the router (that is, modifying and
"Locking the Running Configuration"
"Browsing the Target or Running Configuration"
"Getting Configuration Data"
–
"Browsing the Changed Configuration"
"Modifying the Target Configuration"
"Loading the Target Configuration"
"Setting the Target Configuration Explicitly"
"Saving the Target Configuration"
"Committing the Target Configuration"
"Loading a Failed Configuration"
"Unlocking the Running Configuration"
"Getting Commit Changes"
"Clearing a Target Session"
"Rolling Back Configuration Changes to a Specified Commit Identifier"
"Rolling Back Configuration Changes to a Specified Number of Commits"
"Getting Rollback Changes"
"Getting Configuration History"
Chapter 2 Cisco CRS-1 Series XML Router Configuration and Management
section and the "Committing the Target
OL-4596-01