Analogue alarm clock for under-pillow vibrator (12 pages)
Summary of Contents for Casio DQR-100U
Page 1
MA0402-EB Operation Guide DQR-100U Main unit Sub-unit °C/ °F RESET TEMP. CLEAR MAX/MIN °C/ °F RESET RESET TEMP. CLEAR MAX/MIN RESET • A sticker is affixed to the glass of this clock when you purchase it. Be sure to remove the sticker before using the clock.
Operation Guide DQR-100U GENERAL GUIDE TIME CALIBRATION SIGNAL RECEPTION PRECAUTIONS • This clock is able to receive the time calibration signal transmitted from Main unit Rugby, England. Signal reception is possible within approximately 1,000 kilometers Rugby 1 SNOOZE/LIGHT button 1,000 km of the transmitter.
Operation Guide DQR-100U USING THE CLOCK 2. While the screen you want is on the display, use the Alarm Time Set buttons (2) to change the digits that are flashing. Any of the following procedures can be used to set current date and time.
Operation Guide DQR-100U USING THE LIGHT THERMOMETER FUNCTIONS Pressing the SNOOZE/LIGHT button (1) turns on the light and illuminates the display for easy reading in the Both the main unit and the sub-unit are equipped with their own temperature sensors. Temperature data measured dark.
Operation Guide DQR-100U • To clear the high temperature and low temperature data memory, press the CLEAR button (8). MAIN UNIT/SUB UNIT COMMUNICATION PRECAUTIONS New data starts to be stored after memory is cleared. Sub Unit Location • Certain environmental conditions can greatly reduce the communication range.