Bobrick Fino Series Installation Instructions

Grab bars

Download this manual

In the U.S.A.: BOBRICK WASHROOM EQUIPMENT, INC.

Los Angeles: 6901 Tujunga Ave., North Hollywood, CA 91605-6213: Tel: (818) 982-9600, FAX: (818) 503-1102

New York: 200 Commerce Drive, Clifton Park, NY 12065-1350; Tel: (518) 877-7444, FAX: (518) 877-5029,

or e-mail: customerservice@bobrick.com

In Canada: BOBRICK WASHROOM EQUIPMENT COMPANY

45 Rolark Drive, Scarborough, Ontario M1R 3B1 • Eastern Canada: Tel: (877) 423-6555 • FAX: (877) 423-8555

Form No. 9806-9807-75_ii Revised 8/29/24

• Western Canada: Tel: (877) 423-6444 • FAX: (877) 423-8444

Installation Instructions for Grab Bars

B-9806 and B-9807

To ensure user, installer, and product safety, please use cut-

resistant gloves before handling any material prior to installation.

NOTE:

For Installation on

a. Dry-Walls

b. Glass-Partitions and Metal Partitions as well as

c. "back-to-back-installation of two grab bars against each other

from opposite sides of partition-panels (glass and any other

partition material)

Please see separate installation instructions of respected

installation kits.

Required Tools

a. Spanner (preferably ring end) 13mm (similar to ½")

b. Laser/Spirit level

c. Phillips head screwdriver

d. six pcs. #10 sheet metal screws, flat head, stainless steel, length

depending on application (e.g. 1/2" length for 1/2" material and

3/4" length for 3/4" material)

Need help?

Do you have a question about the Fino Series and is the answer not in the manual?

Page 1 (e.g. 1/2" length for 1/2" material and 3/4" length for 3/4" material) In the U.S.A.: BOBRICK WASHROOM EQUIPMENT, INC. Los Angeles: 6901 Tujunga Ave., North Hollywood, CA 91605-6213: Tel: (818) 982-9600, FAX: (818) 503-1102 New York: 200 Commerce Drive, Clifton Park, NY 12065-1350; Tel: (518) 877-7444, FAX: (518) 877-5029, or e-mail: customerservice@bobrick.com...
Page 2 120° apart on a 38.0mm (1-1/2") Bolt/Pitch Circle Diameter (BCD/PCD). Bobrick recommends using #10 Sheet metal screws, flat head, length depending on application. Screw heads want to be below flush. Use a level to assist in laying out.

Fino b-9806Fino b-9807Fino b-9807.mblk