Satel APB-210 Manual
Satel APB-210 Manual

Satel APB-210 Manual

Wireless control button

Advertisement

Quick Links

Wireless control button
APB-210
EN
Firmware version 1.00
apb-210_en 05/24
SATEL sp. z o.o. • ul. Budowlanych 66 • 80-298 Gdańsk • POLAND
tel. +48 58 320 94 00
www.satel.pl

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the APB-210 and is the answer not in the manual?

Questions and answers

Summary of Contents for Satel APB-210

  • Page 1 Wireless control button APB-210 Firmware version 1.00 apb-210_en 05/24 SATEL sp. z o.o. • ul. Budowlanych 66 • 80-298 Gdańsk • POLAND tel. +48 58 320 94 00 www.satel.pl...
  • Page 2 (the device was placed on the market after 13 August 2005). SATEL aims to continually improve the quality of its products, which may result in changes in their technical specifications and software. Current information about the changes being introduced is available on our website.
  • Page 3: Table Of Contents

    CONTENTS Features ........................... 2 Description ........................2 Radio communication ....................... 2 Control of the ACU-220 controller output ................2 Energy saving mode (ECO) ....................2 Battery status control ......................2 Installation ........................2 Battery replacement ......................4 Specifications ........................5...
  • Page 4: Features

    APB-210 SATEL The APB-210 button can be used to control the operation of various devices (e.g. automation or access control system devices). It can also be used to generate a panic alarm or call for help in emergency situations. It is designed to work within the ABAX 2 two-way wireless system.
  • Page 5 The sticker with the serial number required for registration of the button in the system can be found inside the battery socket. In the INTEGRA alarm system, you can add and configure the APB-210 button only in the DLOADX program.
  • Page 6: Battery Replacement

    APB-210 SATEL 4. Place the button in its selected mounting location. 5. Check the level of signal received from the button by the ABAX 2 controller. If the signal level is lower than 40%, select another mounting location. It may be sufficient to shift the device ten or twenty centimeters.
  • Page 7: Specifications

    SATEL APB-210 5. Specifications Operating frequency band ....... 868.0 MHz ÷ 868.6 MHz / 915 MHz – 928 MHz Radio communication range (in open area) ACU-220 ....................up to 1000 m ACU-280 ....................up to 500 m Battery ........................CR2032 3 V Battery life expectancy ..................

Table of Contents