Download Print this page

Conambo JBT700 Quick Start Manual

Advertisement

Available languages

Available languages

Quick Links

1. Welcome to your new Conambo headset
We appreciate your choice of Conambo headset. Before use, please
read this manual carefully and keep it for future reference. To learn
more and get support, welcome to visit our official website:
www.conambo.com. Or email us at sales@conambo.com, or call us
JBT700 Wireless Headset
at 86-755-88608031.
Committed to be better
2. Important Safety Information
Note: Each dongle is matching the only one headset.
1
• Do not use the headset at a high volume for any extended period
to prevent hearing damage.
• The JBT700 can be powered by a built-in rechargeable battery,
please charge the battery for at least 2 hours before first use.
• Removal of the battery in the headset shall not be conducted on
your own.
• Do not expose the headset to moisture, extreme prolonged heat,
cold, humidity, or other adverse conditions.
• Clean the unit with a soft cloth or damp chamois leather. Never
use solvents.
• Keep the headset, accessories, packaging parts out of reach of
children to prevent accidents and choking hazards.
• Do not drop, crush, bend or apply excessive force to the device.
3. Operations
2
Pairing & Connection
• Pair to mobile device
1) To put your headset in pair mode, press and hold the Multi-
Function Button until you hear "pairing" and the headset LEDs flash
red and blue.
2) Activate Bluetooth on your phone and set it to search for new
devices. NOTE: *Menus may vary by device.
3) Select "JBT700" to pair. If necessary, enter four zeros (0000) for
the passcode or accept the connection. Once successfully paired, you
will hear "connected" and the headset LEDs flash blue.
• Pair to the second device
1) Pair with your first device.
2) Activate Bluetooth on your second device and set it to search for
new devices. NOTE: *Menus may vary by device.
3) Turn off the headset, then press and hold the Multi-Function Button
until you hear "pairing" and the headset LEDs flash red and blue.
4) Select "JBT700" on your two devices to pair. Once successfully
paired, you will hear "connected" twice.
3
4

Advertisement

loading
Need help?

Need help?

Do you have a question about the JBT700 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Conambo JBT700

  • Page 1 NOTE: *Menus may vary by device. 2. Important Safety Information 3) Select "JBT700" to pair. If necessary, enter four zeros (0000) for the passcode or accept the connection. Once successfully paired, you • Do not use the headset at a high volume for any extended period will hear “connected”...
  • Page 2 3) The program of mobile phone is error. Multi Point Connection Connection with 2 Devices 3) Configure for media (Set JBT700 as input & output device): 3) Keep the headset in the range of 10m to the mobile phone Solutions: Profiles A2DP V1.3, AVRCP V1.6, HFP V1.7...
  • Page 3 •Lange drücken 5S: Das rote Licht blinkt, schalten Sie Headset-LEDs rot und blau blinken. Bedingungen aus; 4) Wählen Sie "JBT700" auf Ihren beiden Geräten, um sie zu •Reinigen Sie das Gerät mit einem weichen Tuch oder feuch- Kopfhörer aus; koppeln. Nach erfolgreicher Kopplung hören Sie zweimal "...
  • Page 4 2) Arbeiten Sie mit der Referenz der Nutzungsschritte. Gründe Bluetooth Version BluetoothV5.0 3) Konfigurieren für Medien (JBT700 als Ein- und Ausgabegerät •Mögliche Gründe: 3) Halten Sie das Headset im Bereich von 10m zum einstellen): Multi-Point-Verbindung Verbindung mit 2 Geräten 1) Das Headset befindet sich nicht im EIN- und Standby- Mobiltelefon ohne Hindernis.
Save PDF