Conambo K10C - Wireless Headset Manual

Welcome to your new Conambo Headset

We appreciate your choice of Conambo headset. Before use, please read this manual carefully and keep for future reference. To learn more and get support, welcome to visit our official website: www.conambo.com, email us via sales@conambo.com, or call us 86-755-88608031.

Important Safety Information

• Do not use the headset at a high volume for any extended period to prevent hearing damage.
• The K10C powered by built-in rechargeable battery, please charge the battery for at least 2 hours before first use.
• Removal of the battery in the headset shall NOT be conducted on your own.
• Do not expose the headset to moisture, extreme of prolonged heat, cold, humidity, or other adverse conditions. Clean the unit with a soft cloth or damp chamois leather. Never use solvents.
• Keep the headset, accessories and packaging parts out of reach of children to prevent accidents and choking hazards.
• Do not drop, crush, bend or apply excessive force to the device.

Operations

• Charging the headset
  The built-in battery is rechargeable and please use the included micro USB cable to charge the headset by connecting to a USB port of your computer, power bank or into an USB AC adapter(requires 5VDC).
  Turn off the headset before charging, while charging, the red indicator stays on.
  Once fully charged, the blue indicator will light on.
  NOTE: Do not attach the charger mid-call. This will cause the headset to reset, and the call will be sent back to the phone.
• POWER ON
  Slide the switch down, the blue indicator will flash once and you will hear a voice prompt, "Power on".
• POWER Off
  Slide the switch up, the red indicator will flash two times and you will hear a voice prompt, "Power off".
• Pairing & Connection
  Enter pairing mode

1. Auto enter pairing mode when you power on the headset at first time, the blue and red indicator flashes alternately and you will hear voice prompt, "pairing". Or hold the Multi-Function Button for 5s until the blue and red indicator flashes alternately when power on.

Connect your phone

1. Turn on the headset and enter pairing model(the headset indicator flashes red and blue alternately), Put on your headset and will hear "pairing".
2. Put your cell phone in Bluetooth Search/Scan Mode.
3. Select "K10C" to pair. (Password is "0000" if needed.)
4. When connected, you will hear a voice prompt "connected"and the blue indicator will flash once.

Pair and connect with second device

1. Turn off the Bluetooth function of the first device.
2. While your headset stays power on, hold the Multi-Function Button for 5s until the headset enter pairing mode, the headset indicator flashes red and blue alternately.
3. Put your second device in Bluetooth Search/Scan Mode, select "K10C".
4. When connected, you will hear a voice prompt "connected"and the blue indicator will flash once.

• Answering/Reject a Call

1. When a call is coming, press the Multi-Function Button once to answer the call and press it again to end the call.
2. When a call is coming, press and hold the Multi-Function Button 1-2s to reject the call.

• Last Number Redial

1. Make sure the headset is connected to your phone.
2. Double-tap the Multi-Function Button to redial the last number.

• Phone Voice Control (e.g. Siri/ Google Assistant)
  Press the Mute Button for 3s while the headset is in standby status to activate voice command functions on your phone. Support for this is phone dependent.
• Adjust the volume
  Press the volume up or down during a call or while streaming audio.
• Mute
  During a conversation, press the Mute button. You hear "mute on" or "mute off".
• Reconnect

1. Your headset will direct connect with previous Bluetooth device.
2. If the headset doesn't connect, please hold Multi-Function Button for 5s until the blue and red indicator flashes alternately to enter pairing mode.

• Resetting
  When charging, hold the Multi-Function Button for 4s till the blue indicator flashes to recover default settings.

Wearing

NOTE
Remove your eyeglasses before donning the headset for best fit.

To wear the headset on your other ear, rotate the boom upwards then twist it around so the eartip is on the other side before lowering the mic boom.

Troubleshooting

The mobile phone can not find the headset

Possible Reasons:

No sound from the headset

Possible Reasons:

1. The volume of the mobile phone is unsuitable;
2. The Wireless headset and mobile phone are not connected correctly;
3. The Wireless headset is out of the working range.

Solutions:

1. Adjust the volume in the mobile phone;

Charging red indicator doesn't light on

Possible Reasons: The headset has not been used for a long period.
Solutions: Charge headset for 30mins, then the red indicator may light on.

It will drop the capacity and service life of the battery if it is over charged or the Wireless headset is stored in the environment such as closed car.

Made by
SHENZHEN KENANBO TECHNOLOGY CO.,LTD
Add: RM. 208, Building 2, Jinfanghua E-business Industrial Zone, No 450 Bulong Rd. Bantian Street, Longgang District, Shenzhen.
TEL: 86-755-88608031
E-mail: sales@conambo.com
www.conambo.com