Door Reversal Instructions; Operating Instructions - Danby Designer DUFM320WDD Owner's Use And Care Manual

Danby products upright freezer owner's use and care guide
Table of Contents

Advertisement

Available languages

Available languages

OPERATING INSTRUCTIONS

3
FEATURES
1
1) THERMOSTAT DIAL: For controlling the
temperature inside the freezer. Turns the motor on
4
as soon as the temperature rises above the desired
level.
2) REFRIGERATED SHELVES:3 full width
refrigerated shelves.
2
3) MAGNETIC GASKET: Tight fitting door seal
keeps all the cooling power locked inside. No hooks
or latches.
4) DOOR BINS (4)
5) DRIP TRAY
DOOR REVERSAL
INSTRUCTIONS
CAUTION: To avoid personal injury to
yourself and/or property, we recommend
someone assist you during the door reversal
process.
Fig. 1: Remove plastic plugs from top of
cabinet and door.
Fig. 2: Loosen top hinge screws. Remove
top hinge from current position and install
Fig. 3
Fig. 1
with holes on other side of door.
Fig. 2
Fig. 3: Remove plastic plugs from bottom
door.
Fig. 4: Remove bottom screws, pin and
hinge. Rotate screws, pin and hinge from
current position with holes on other side of
cabinet and door.
Fig. 5: Bottom screws and hinge shown on
other side of cabinet and door.
Fig. 5
Fig. 4
NOTE: DO NOT OVER-TIGHTEN
SCREWS. A SNUG FIT IS ALL THAT IS
REQUIRED.
2

Advertisement

Table of Contents
loading

Table of Contents

Save Article as PDF