Advertisement
Perform the following key operations from the statistical data list.
3(TEST)
b(Z)
b(1-Smpl)
The following shows the meaning of each item in the case of list data specification.
Data ............................ data type
µ .................................. population mean value test conditions ("G µ
µ
................................. assumed population mean
0
σ .................................. population standard deviation ( σ > 0)
List .............................. list whose contents you want to use as data (List 1 to 20)
Freq ............................. frequency (1 or List 1 to 20)
Save Res ..................... list for storage of calculation results (None or List 1 to 20)
Execute ....................... executes a calculation or draws a graph
The following shows the meaning of parameter data specification items that are different
from list data specification.
o
.................................. mean of sample
n
.................................. size of sample (positive integer)
After setting all the parameters, align the cursor with [Execute] and then press one of the
function keys shown below to perform the calculation or draw the graph.
• 1(CALC) ... Performs the calculation.
• 6(DRAW) ... Draws the graph.
1-2-3
Tests (TEST)
two-tail test, "< µ
" specifies lower one-tail test, "> µ
0
specifies upper one-tail test.)
20011101
20010101
" specifies
0
"
0
Advertisement
