Sanyo Xacti VPC-HD1AEX Quick Manual

SA\YO
Digital Movie Camera
VPC-HD1AEX
VPC-HD1A
STEP 1
RECORD A VIDEO CLIP
i
QUICK GUIDE
Turn on the camera.
• Press the ON/OFF
button for at least
1 second.
Set the main switch
to REC.
Press the video clip
recording button
[■□I-
• Recording begins.
•To stop recording,
press the video
clip recording
button again.
If the image is not captured...
Is there enough power left in the battery? Recharge the
battery pack.
(See "CHARGE THE BATTERY PACK" on the reverse side.)
Is an SD Memory Card installed in the camera? Install a card.
STEP 2
CAPTURE A STILL IMAGE
Turn on the camera.
You can capture a still image while recording
a video clip.
Set the main switch
to REC.
Press the still image
shooting button
[Dl-
Press the video clip
recording button
[ID] to begin
recording.
V
(ft)
To capture a single
shot while
recording, press the
still image shooting
button [Q],
•The scene at the
time the still image
shooting button
was pressed is
captured as a still
image.
■§<