Do you have a question about the NEW430BL and is the answer not in the manual?
Questions and answers
Gloria Linda Newlyn
February 3, 2025
my new eureka 430BL tells me to start cleaning mode and to clean the roll when I haven't even used it
1 comments:
Mr. Anderson
February 10, 2025
The Eureka NEW430BL may indicate to start cleaning mode and clean the roll even when it has not been used because of its self-cleaning feature. This feature automatically flushes the inner tubing and brush roller to maintain hygiene and prevent odors. It ensures the roller brush remains clean and free from debris, even if the vacuum mop has not been actively used.
Do not operate the vacuum cleaner or charger if it has been damaged in any way. If vacuum cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, call the Eureka Customer Service HELPLINE at 1-800-282-2886.
Page 5
SAFETY INSTRUCTIONS • Liquid ejected from the battery may cause irritation or burns. If the liquid gets on the skin, (1) seek medical attention, (2) wash quickly with soap and water, and (3) neutralize with a mild acid such as lemon juice or vinegar.
Page 6
Do not incinerate this appliance even if it is severely damaged. Contact local waste facility before discarding in trash. • Always use Eureka cleaning solution in your machine, other cleaning solutions may damage the machine and void the warranty. •...
PRODUCT OVERVIEW Handle Mode button ON/OFF button Clean water tank Dirty water tank release button Dirty water tank handle Dirty water tank Brush front cover Roll brush...
Page 8
PRODUCT OVERVIEW List of Accessories Self cleaning function: the battery indicator light displays a constant blue light. Drying function: the battery indicator light is blinking blue for 30 seconds before turning o . Turbo mode Battery indicator light Charging/docking Adapter x 1 Cleaning brush Lights up when the dirty Eco mode...
PRODUCT INSTALLATION Handle Installation and Removal Insert the charging end of the charger into the rear port of the charging dock, and connect the plug to a 100V-240V power. Installation Put the machine upright into the charging/docking station, Insert the end of the handle into the and make sure that the bottom of the body completely falls port of the main unit along the into the charging base.
Page 10
Cleaning Solution Filling Clean Water Tank ATTENTION Note: Eureka cleaning solution only. Fill water only to the clean water tank. Screw the water tank back into place on the machine, Hold the machine with one hand, grab the water tank and when you hear a click sound, it means the with the other hand, rotate and remove the water tank.
OPERATION INSTRUCTIONS The machine defaults to ECO mode when it starts. Turning On and Cleaning To switch to the Eco mode, press the mode switch button. Press this button again to switch to the Step on the floor brush and pull the handle diagonally Dry mode.
Page 12
OPERATION INSTRUCTIONS Upright Pause Function In working state, you can step on the floor brush to erect the When the machine is in charging state, short press the self-cleaning button to activate the self-cleaning and body, the machine will stop working and enter standby state; it will automatically turn o after 2 minutes of standby.
CLEANING AND MAINTENANCE Hold the tank with one hand and pull out the top cover Waste Water Detect Alarm of the tank with the other hand. ATTENTION Top cover of dirty water tank • After cleaning, it is recommended to place Upwards the machine upright in the charging base;...
Page 14
CLEANING AND MAINTENANCE If there is still hair or other debris tangled on the roll Roll brush and Cover Cleaning brush after self-cleaning, remove the tangled debris from the roll brush; for heavy-duty cleaning (such as tomato ATTENTION sauce, soy sauce, etc.), if there is still dirt residue on the roll brush after self-cleaning, it can be self-cleaned •...
Page 15
CLEANING AND MAINTENANCE If there are any residual stains on the suction nozzle (the After cleaning, cover the floor brush, align it with the part exposed after removing the roll brush) after installation hole, press it down, and you will hear a click self-cleaning, please wipe it with a damp cloth instead of when it is successfully installed.
PROBLEM SOLVING Make sure vacuum is turned o and power cord is unplugged. NOTICE: Thermal cut-o This vacuum cleaner has a special thermostat that protects the vacuum in case of motor overheating. If the vacuum suddenly shuts o , proceed as follows: 1) Push the power switch to o and unplug the vacuum. 2) Check the vacuum for a possible source of overheating such as a full dirty water tank, blocked intake passage or clogged filter.
Page 17
PROBLEM SOLVING Make sure vacuum is turned o and power cord is unplugged. Possible cause Solutiom Roll brush, roll brush cover and waste Reinstall water tank are not installed properly The roll brush is entangled with hair and Clean the roll brush Suction power is weakened other objects The nozzle or pipe is blocked...
SPECIFICATIONS Product Model NEW430BL Voltage 22.2V Problem Charging rated input 100-240V~ 50/60Hz Product Size 270x282x1120mm Charging output 0.8A Clean water tank volume 800mL Dirty water tank Charging time 3-4h 400mL MAX line volume Power 230W...
Need help?
Do you have a question about the NEW430BL and is the answer not in the manual?
Questions and answers
my new eureka 430BL tells me to start cleaning mode and to clean the roll when I haven't even used it
The Eureka NEW430BL may indicate to start cleaning mode and clean the roll even when it has not been used because of its self-cleaning feature. This feature automatically flushes the inner tubing and brush roller to maintain hygiene and prevent odors. It ensures the roller brush remains clean and free from debris, even if the vacuum mop has not been actively used.
This answer is automatically generated