Advertisement
Cable Restraint (J1 ,J2, J3)
(J2)
The switchbox is provided with a lock-off button
to prevent accidental starting.
To Start Your Lawnmower. (L1, L2, L3)
(L1)
To Start your Lawnmower (M1, M2, M3)
Fig P1
P1-P3
Levers Fitted, Lowest Cut Height - (Q2,4)
Levers Fitted, Highest Cut Height - (Q3,5)
Levers Fitted, Semi Central - (Q6)
Levers Fitted, Central (Q7)
If you have levers fitted to the wheel do not
attempt to unscrew the wheel hub. Use the
levers to alter the height of cut.
Always handle the blade with care - sharp edges
could cause injury. USE GLOVES. Renew your
metal blade after 50 hours mowing or 2 years
whichever is the sooner - regardless of condition.
If the blade is cracked or damaged replace it with
a new one. Never use a blade bolt if the insulated
head is damaged cracked or missing.
Removing the Blade and Fan
IMPORTANT - USE GLOVES
Never use water for cleaning your lawnmower.
Do not clean with chemical, including petrol, or
solvents - some can destroy critical plastic
parts.
(T)
ENGLISH - 3
Cable Restraint
(J1)
(J3)
Starting and Stopping
(L2)
(L3)
How to Mow
(N)
Cutting Height (Without Levers)
Cutting Height (With Levers)
Cutting System
(R)
Cleaning
Cable Restraint (K1, K2, K3)
(K2)
To Stop Your Lawnmower.
NOTE (M1, M2, M3)
There are two start/stop levers fitted. Either one
can be used for starting the lawnmower.
IMPORTANT
Do not use the start/stop levers intermittently
Please Note
Do not overload your Lawnmower
Cutting Height
(P2)
(Figs. Q2 - Q6)
Please Note : Your electric wheeled rotary may
be fitted with a mixture of cutting heights.
Fitting the Blade and Fan
(U)
(K1)
(K3)
(M1)
(M2)
(M3)
(P1)
(P3)
(Figs. Q)
(Q1)
(S)
(V)
Advertisement
