Voice Prompts; Audio Recorder - Creative Sound BLASTER ROAR Reviewer's Manual

EXPERIENCING THE SOUND BLASTER ROAR
PLUS A WHOLE ARRAY OF MIND-SHATTERING FEATURES!

Voice Prompts

The Sound Blaster Roar features an intuitive
voice prompt system that helps you set up a
Bluetooth connection with your device. Once
you're familiar enough with the speaker, you
have the option to disable the voice prompts.

Audio Recorder

You can use the Sound Blaster Roar to record a phone conversation, a discussion, or even a song playing
via Bluetooth . A folder labeled "VOICE" will be automatically created on your microSD card by the Sound
Blaster Roar to store all your audio recordings.
Here's how you do it!
1
Insert a microSD card.
microSD
Card
2
Select source.
From built-in microphone
Switch on the microphone.
– Records voice and sounds
picked up by the microphone.
From Aux-in / Bluetooth source
Mute the microphone.
– Records Aux-in audio
directly from your media
player or Bluetooth device.
T HE S OUN D B L AS T E R R OA R R E V I E WE R S ' G U I DE
Here's how you do it!
To disable voice prompts:
When the speaker is powered on, press
–
and together.
To enable voice prompts:
When the speaker is powered on, press
+
and together.
3
Press (REC) to start recording.
REC
Press (REC) again to stop recording.
4
Press (REC) to playback recordings.
REC
To skip recorded tracks:
Press or during playback.
MegaStereo Feature
(cont.)
Enjoy the full MegaStereo experience with another Sound Blaster Roar!
The MegaStereo technology is a unique feature built into the Sound Blaster Roar to give you a
wider soundstage and double the punch when 2 Sound Blaster Roar are connected together with a
MegaStereo cable.
1. MegaStereo mode *
An option is provided for dual Sound Blaster Roar(s) to be connected together with the MegaStereo cable
to deliver "MegaStereo" where the left Roar's high frequency drivers both deliver the left channel and
the right Roar's high frequency drivers both deliver the right channel. This enables for a much wider
stereo soundstage one would normally associate with in a typical home stereo system.
Simply connect the white part of the cable to the Aux-in of the left speaker, red part to the aux-in of the
right speaker and crank up the volume to enjoy!
18 TH E SOUND BLA STER ROA R R EV IEWERS' GUI DE
MASTER (LEFT) SLAVE (RIGHT)
19