Advertisement
Quick Links
Power OFF
2- or 3-tube
before
mode switch
switching
3-tube
Tube vent
DO NOT BLOCK
1/8", 3.5mm
headphone
output
Do NOT select the 2-3 Tube mode when the amplifier is
power ON. Failure to do so can damage the unit and
the sound will be distorted. Reset power cycle by
power OFF then ON.
Do NOT use the amplifier in a bag. Do NOT cover the
unit when it is power ON.
2-tube
Turn volume to 0
(minimum) before
switching power
ON/OFF or
changing
headphones
1/4", 6.3mm
headphone output
Thank you for choosing
WA8 Eclipse
Vacuum Tube Headphone Amplifier & DAC
Quick Start Guide
Please Read Before Use
wooaudio.com
info@woouadio.com
+1 917 773 8645
tm
All Rights Reserved. Woo Audio
, New York, USA
Advertisement
Related Manuals for Woo Audio WA8 Eclipse
Summary of Contents for Woo Audio WA8 Eclipse
- Page 1 Reset power cycle by +1 917 773 8645 power OFF then ON. Do NOT use the amplifier in a bag. Do NOT cover the unit when it is power ON. All Rights Reserved. Woo Audio , New York, USA...
- Page 2 Battery Charger DC Input, 12.6V switching power supply that supports AC100 to AC240. ③ Type A to B USB cable One LED means battery is critically low, charge immediately to avoid ④ WA8 Eclipse. Vacuum tubes are pre-installed playback interruption. ⑤ Pelican hard case...
Need help?
Do you have a question about the WA8 Eclipse and is the answer not in the manual?
Questions and answers