Related Manuals for Jegs 555-41405
Summary of Contents for Jegs 555-41405
- Page 1 Installation Guide Transmission Temperature Gauge 555-41405 (Black), 555-41407 (White), & 555-41409 (Silver) in. Diameter...
-
Page 2: Table Of Contents
Table of Contents Parts List..............02 Mounting............04 Read Before Installation........03 Sensor..............05 Notes..............03 Bezel..............05 Wiring..............04 Final Assembly..........05 Lighting..............04... -
Page 3: Parts List
Parts List Transmission Temperature Gauge [ 2 in.] Gauge Light Socket, Bulb, & Wiring Gauge Mounting Bracket Sensor Silver Bezel Spade Connector & Sleeve Black Bezel Mounting Bracket Hardware... -
Page 4: Read Before Installation
Notes Read Before Installation Thank you for your purchase of this JEGS Transmission Please read these instructions completely before Temperature gauge. Before installation, please be performing the installation. sure to verify that all of the components have been received. Reference the parts list on the previous •... -
Page 5: Installation
Installation Wiring • With the sending unit installed in the transmission, run a length of wire from it to the gauge. Securely fasten the wire so that it is away from heat sources and moving parts. • Install the included female spade connector, on the sending unit end of the wire. -
Page 6: Sensor
Wiring Continued Sensor Bezel When installing the sensor there are two methods This gauge is supplied with two interchangeable to choose from. bezels, in additional to the permanently mounted bezel. The stock bezel is a polished stepped design. 1. Transmission Oil Pan The others are rounded in silver and black.
Need help?
Do you have a question about the 555-41405 and is the answer not in the manual?
Questions and answers