Selfie Ring Light with
Tablet Holder
Specifications
Input Rating: 5V d.c. 2A 10W
LED Light Source Output: 830lm
LED Light Source Colour Temperature: 3000-6500K
LED Light Source Current: 1.8A
LED Light L70B50 Lifetime: 30,000 h
LED Light Source On-mode Power: 9W
LED Light Source Colour Rendering: >80
LED Ring Dimensions: 27 x 27 x 2.1 cm
Max Stand Height: 220cm
This product contains a light source of energy
efficiency class F.
This product fulfils the European directives 2011/65/EU and 2014/30/EU.
Compliance with the WEEE Directive and disposal of waste products. This product has been made from high-quality parts and
materials which can be reused and are suitable for recycling. Therefore, do not dispose of the product with normal household waste
at the end of its service life. Take it to a collection point for the recycling of electrical and electronic equipment. This is indicated by
this symbol on the product, in the operating manual and on the packaging. Please consult your local authorities to find out where the
nearest collection point is. Help protect the environment by recycling used products.
Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment
Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging
material collection points designated by the local authorities.
Safety Instructions
•
Do not look directly into the LEDs when operating
•
LED light output is strong enough to injure human eyes.
Precautions must be taken to prevent looking directly at
the LEDs for more than a few seconds
•
Long-life LED lights are not replaceable
•
For indoor use only
•
Keep away from liquids, oils, petrol, and all chemicals
•
Do not expose to heat sources
•
The external flexible cable or cord of this luminaire cannot
be replaced; if the cord is damaged, the luminaire shall be
destroyed
•
If the lighting fixture is damaged, it should be exclusively
replaced by the manufacturer or the service agent or
qualified person in order to avoid a hazard
•
Never add any attachments and/or equipment without
the approval of the manufacturer
•
Unauthorised modifications may result in fire, electric
shock or other personal injury and void your warranty
•
Keep away from children
•
Supervise young children to ensure they do not play with
the product
•
The luminaire is not suitable for mounting on tubular
material.
•
The product shall be supplied by a external independent
LED driver with at least 5V, 2A SELV output.
•
The light source of this luminaire is not replaceable; when
the light source reaches its end of life the whole luminaire
shall be replaced
•
WARNING: The external flexible cable or cord of this
luminaire cannot be replaced; if the cord is damaged, the
luminaire shall be destroyed
•
WARNING: This product is only intended for use as selfie
light, image capturing purpose
•
WARNING: This product is not suitable for household
room illumination
Product Overview
1. Ring light
2. Phone holder*
3. Side cog
4. Back cog
5. Top wing nut
6. Bottom wing nut
7. Tripod wing nut
8. Light controller
9. Tablet holder
10. Tablet ball and socket joint
*Phone not included
1
2
4
10
9
3
5
6
7
8
Need help?
Do you have a question about the HE210248 and is the answer not in the manual?
Questions and answers