Aco Injection; Freeavailable Cl - PoolCop Genesis Installer And User Manual

A C O I n j e ct i o n
Set ACO parameters.
The injection takes place on Friday during the day, the time may vary
depending on the filtration cycles:
In 24/24 or NO_PMP
In the other modes, the injection will take place between 8 a.m.
and 6 p.m. subject to a filtration period long enough to allow
the injection.
ACO injection is only possible with XM8 Extension Module and is
controlled by AUX 12
Installed
If INSTALLED: YES, PoolCop will control the ACO injection according to parameters
settings.
If set to NO, this function is deactivated.
Injection Rate
Set the feeder pump injection rate. Combined with pool volume
the injection rate will used to calculate the remnant injection duration based on
25 ml/m3/week.
Priming
Ensure the feeder pump is connected to the chosen Aux and correctly powered.
Commanding priming ON
feeder pump to prime. Priming is stopped when quitting the menu or after 60 seconds.
F r ee A v a i la b l e C L
This menu is detailed in PoolCop Chlorine Sensor FAC Installer and User Manual.
modes, injection will be activated at 1 p.m.
will activate the Aux channel for 60 seconds allowing the
P o o l C o p G e n e s i s M a n u a l : G N 4 4 M A N U S
A C O I N J E C T I O N
> Installed
Inj. Rate
Priming
S E L E C T
Text:
Default:
Entries:
Text:
(POOL DATA menu),
Default:
Entries:
Text:
Default:
Entries:
: YES
: 1.2 l/h
: OFF
Q U I T
Installed
NO
YES;
NO
Inj. Rate
1.2 l/h
(7.5 GPD)
0.1 - 9.9 l/h
(0.63 - 62.8 GPD)
Priming
OFF
ON;
OFF
P a g e | 9 1