Operation; Key Pad Functions; Auto-Timer Adjust; Lcd Display - Danby DPAC10010 Owner's Use And Care Manual

Warning Light

KEY PAD FUNCTIONS

POWER SWITCH: Turns unit ON/OFF
MODE: Allows you to scroll through and
select desired operating mode.
FAN: Select from three different fan settings;
High, Medium, and Low.
AUTO-TIMER

AUTO-TIMER Adjust:

AUTO TURN OFF- With machine in running mode,
press timer button to set timer control. Press
buttons to select number of hours you would
like the unit to run before it automatically shuts off.
AUTO TURN ON- With machine in stand by mode,
press timer button to set timer control. Press
buttons to select number of hours before the unit
automatically starts running in air conditioning mode.
NOTE: The time is adjustable between 1-24 hours.
TEMPERATURE Adjust:
• Used for adjusting the thermostat.
• The default display is room temperature.
• In cooling mode, when
the set temperature is displayed and may be adjusted.
After 15 seconds the display will revert back to room
temperature. Temperature is only adjustable in cool
mode.

OPERATION

NOTE: By pressing both
the same time for more than 3 seconds, the display
will toggle between Celsius and Fahrenheit.
Warning Light
Condensed water may accumulate in the unit. If the
internal tank becomes full, the Warning signal in the
LCD Display will light up and the unit will not
operate until it has been drained.

LCD Display

button is pressed,
5
Cooling Mode
Dehumidify Mode
Fan Only Mode
High Fan Speed
Medium Fan Speed
Low Fan Speed
Display Set Temperature
Display Timer Setting of Auto Switch ON /
OFF
Warning Light (the machine will stop
running)
Receiving Sensor
buttons at