SeaSoft MobilSwitch-Nano Quick Start Manual

Mobil Switch-Nano
The
MobilSwitch-Nano
signaling and remote control. It has a common
low voltage and relay
notebook. The device notifies the users via pre-configured SMS-s and voice calls, and it has an optional
acknowledging function. The relay output can be triggered by user-configured SMS-s or free voice calls
dedicated users. The relay can be configured to operate in
turned off automatically within a time interval) or in
performed with separate commands). It can be programmed for
GSM remote signaling, remote controlling device, either for industrial purposes or home applications, such as
remote signaling and controlling security device. The power supply of the device has industrial input range of
10V-30V DC and draws min.
phone number, and the device operation can be checked with its built-in signal-of-operation function. It has
two variants: either with built-in aerial or
1. Operation:
variations. The DIN-rail enclosured high voltage relay output variant is called the MobilSwitch-nano-C.
SeaSoft kft.
module is a general, industrial-grade GSM module, developed for remote
output. It can be programmed with its own software called "Unified" from any
500mA current. The carrier's SMS-s can be forwarded to the user-configured
RG-174
www.seasoft.hu www.mobil-control.eu
Industrial grade GSM signalling and remote control
module with common input and relay output
which is activated by voltage-less contact, and it has a
input
monostable
bistable mode. (switching the relay on and off are
8 phone
magnetic aerial with
The module holds its configured and programmed data
even after power-off. In the case of carrier problems or
cellular signal loss, the device switches itself off then on,
re-connects to cellular network and restores normal
operation. The device comes with carrier-independent
GSM module. It is sold in a small, white colored plastic
enclosure with small SMA connected aerial or in a small
black colored plastic enclosure with external magnetic
antenna. It comes with a free configuration software can
be downloaded from our website: www.seasoft.hu. It can
be configured with any PC-s with a
MobilSwitch-Nano
grade GSM module that can be operated with any prepaid
or subscription-based
low-current variant is simply called
MobilSwitch-Nano-a
T: (62) 406-405
mode (after switching on, the relay is
numbers, and can be used as a
SMA connector.
micro-USB
has a carrier-independent, industrial-
nanoSIM cards. The low voltage
MobilSwitch-Nano
and available also with two antenna
M: (+36) 30 255 7688
PC or
for
cable. The
or
F: (62) 405-969