• The latest driver can be found at Download Center at https://www.tp-link.com/support. • The Quick Installation Guide can be found where you find this guide or inside the package of the router. • Specifications can be found on the product page at https://www.tp-link.com.
Page 4
• A TP-Link Community is provided for you to discuss our products at https://community.tp-link.com. • Our Technical Support contact information can be found at the Contact Technical Support page at https://www.tp-link.com/support.
Chapter Get to Know About Your Adapter This chapter introduces what the adapter can do and shows its appearance. This chapter contains the following sections: • Product Overview • LED Status...
Chapter 1 Get to Know about Your Adapter Product Overview Wi-Fi 7 offers the forefront of technology to maximize the 6 GHz band. With 4096-QAM, the adapter delivers peak rates 1.2× faster than Wi-Fi 6/6E adapters, ensuring a seamless network experience. ‡...
Page 7
Chapter 1 Get to Know about Your Adapter Indication Status The driver is not installed. The adapter is not detected. Tips: If the LED is off, try these troubleshooting tips: 1. Check if the adapter is recognized and enabled or not. Refer to Appendix: Troubleshooting for detailed instructions.
Chapter Connect to a Computer This chapter introduces how to connect the adapter to your computer.
Page 9
Chapter 2 Connect to a Computer Before You Start: • Make sure your Router or Access Point supports the Wi-Fi 7 standard. • It is recommended to use the adapter on Windows 11 (64-bit) or above. Note: It is recommended to connect the adapter to a USB 3.0 ( ) port.
Chapter Use the Adapter This chapter introduces how to install your adapter’s driver, use your adapter to join a wireless network, and uninstall your adapter in a Windows system. This chapter will use TBE400UH as an example to demonstrate how to use the adapter.
SetupInstall.exe Note: 1. If you cannot find the setup program, please download the driver at www.tp-link.com/support. 2. If an unknown publisher message pops up, select Yes to continue. 3. If Windows User Account Control requires admin credentials, type user name and password of your Windows administrator account.
T2 How to check if I have installed the driver for my adapter successfully or not? On your computer, please right click Computer icon and go to Manage; Open the Device Manager and go to Network adapters, and then find the corresponding TP-Link adapter, right click it and then go to Properties;...
Page 13
If you can see “This device is working properly.” in the red box, you have already installed the driver successfully. T3 What should I do if can’t connect to the Wi-Fi after installing the driver? • Refer to to check if you have installed the driver for your adapter successfully . •...
Page 14
There is a character string “Ver:X. Y ” (for example, Ver:2.0) in the Serial Number field, and the number X is the hardware version of the adapter. • Visit https://www.tp-link.com/faq-46.html and follow the second method to find the hardware version of the adapter. T5 How do I update my operating system? •...
Page 15
FCC compliance information statement Product Name: BE6500 Wi-Fi 7 High Gain Wireless USB Adapter Model Number: Archer TBE400UH/ Archer TBE6500UH Responsible party: TP-Link Systems Inc Address: 10 Mauchly, Irvine, CA 92618 Website: https://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: sales.usa@tp-link.com...
Page 16
Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems. We, TP-Link Systems Inc , has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15.
Page 17
5470MHz-5725MHz(23dBm) 5945MHz-6425MHz(23dBm) EU declaration of conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2011 /65/EU and (EU) 2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/support/ce/...
Page 18
separation of 0.5 cm to the body, while transmitting at the highest certified output power level in all frequency bands of this device. Carry this device at least 0.5 cm away from your body to ensure exposure levels remain at or below the as-tested levels.
Page 19
(2) This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) L’appareil ne doit pas produire de brouillage;...
Page 20
Cet équipement doit être installé et utilisé avec une distance minimale de 5 mm entre le radiateur et votre corps. Cet appareil et ses antennes ne doivent pas être situés ou fonctionner en conjonction avec une autre antenne ou un autre émetteur.
Page 22
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk. Explanation of the symbols on the product label Symbols may vary from products.
Page 23
Operator’s manual Stand-by “ON”/”OFF” (push-push) Fuse Fuse is used in neutral N RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
Need help?
Do you have a question about the Archer TBE400UH and is the answer not in the manual?
Questions and answers