Related Manuals for Peterson StroboStomp Mini
Summary of Contents for Peterson StroboStomp Mini
- Page 1 StroboStomp Mini Plastic LCD Cover Replacement *Before anything, make sure you are wearing gloves to avoid leaving any fingerprints or smudges on the LCD and LCD cover* Remove the 4 screws from the back of the pedal.
- Page 2 StroboStomp Mini Plastic LCD Cover Replacement *Before anything, make sure you are wearing gloves to avoid leaving any fingerprints or smudges on the LCD and LCD cover* Using a 7/16 nut driver or similar tool, unscrew the nuts from the chassis.
- Page 3 StroboStomp Mini Plastic LCD Cover Replacement *Before anything, make sure you are wearing gloves to avoid leaving any fingerprints or smudges on the LCD and LCD cover* Remove the glue and push out the release pin for the ribbon connector.
- Page 4 StroboStomp Mini Plastic LCD Cover Replacement *Before anything, make sure you are wearing gloves to avoid leaving any fingerprints or smudges on the LCD and LCD cover* Using a sharp knife or plastic spudge, carefully remove the plastic screen cover and be carefully not to damage the actual display.
Need help?
Do you have a question about the StroboStomp Mini and is the answer not in the manual?
Questions and answers