Related Manuals for TRENDnet TK-217I
Summary of Contents for TRENDnet TK-217I
- Page 1 Quick Installation Guide TK-217i 1.01...
-
Page 2: Table Of Contents
Table of Contents English 1. Before You Start 2. How to Install 3. Operation 4. Using the KVM Utility Technical Specifications Troubleshooting Version 11.11.2010... -
Page 3: English
1. Before You Start Package Contents Ÿ TK-217i Ÿ Multi-Language Quick Installation Guide Ÿ CD-ROM (Utility) System Requirements Ÿ USB Keyboard Ÿ USB Mouse Ÿ VGA Compatible Monitor Ÿ Computers with a VGA port Ÿ Computers with a USB Port Ÿ... -
Page 4: How To Install
2. How to Install 1. Properly turn OFF your computers and monitors. 2. Connect the shared keyboard, monitor and mouse to the KVM Switch's console ports. 3. Use the integrated KVM cables to connect both of your computers to the KVM Switch. To Computer To Computer Computer 1... -
Page 5: Operation
3. Operation Note: 1. The TK-217i KVM Switch does not require any drivers or software (optional). 2. For Computer switching, you can use the KVM Switch's push button switch, a Hot-Key command sequence via keyboard, or the KVM Utility (Windows / MAC OS X (10.4~10.6) only). -
Page 6: Using The Kvm Utility
4. Using the KVM Utility For Windows Users 1. Insert the Utility CD-ROM into your CD-ROM Drive. 2. Click Run AUTORUN.EXE (Windows 7/Vista Only) 3. Click Install Utility. 4. Click Next. Then follow the Setup Wizard instructions. 5. Click Finish. - Page 7 6. Double click on the USB KVM Switcher icon. 7. If you would like to modify the hot key, type in a character. You can enter any number, letter or symbol. Control keys such as Alt, Ctrl, Shift, CAPS LOCK, Tab, Esc, and Num Lock and function keys cannot be used.
- Page 8 For Mac OS X (10.4~10.6) Users 1. Insert the Utility CD-ROM into your CD-ROM Drive. 2. Double-click on the TK-217i CD-ROM icon on your desktop. 3. Double-click on the Macintosh folder. 4. Double-click on TrendnetUSBKVMSwitcher.pkg. 5. Click Continue. 6. Select a destination and then click Continue.
- Page 9 8. When the Authenticate screen appears, enter the Name and Password for your computer and then click OK. 9. Click Close. 10. Double click on the Macintosh HD icon. 11. Double click on the Applications icon. 12. Click on Trendnet USB-KVM Switcher.
- Page 10 13. Double click on the USB-KVM Switcher icon in the Dock. If your computer is connect to computer 1 port, you should see an icon with the number 1. If your computer is connected to computer 2, you should see an icon with the number 2.
-
Page 11: Register Your Product
Stop Auto-Scan to stop Auto-Scan. Your installation is now complete For detailed information regarding the TK-217i, configuration and advanced settings, please refer to the Troubleshooting section, User's Guide on the Utility CD-ROM, or TRENDnet's website at http://www.trendnet.com. Register Your Product To ensure the highest level of customer service and support, please take a moment to www.trendnet.com/register... -
Page 12: Technical Specifications
Technical Specifictions Hardware Controls 2 Computers 2 sets of VGA and USB combination cables Cable ( length: 77 cm, 31 in.) 2 x USB Type A ports (male) Computer Connectors 2 x 15-pin VGA ports (female) 1 x 15-pin VGA (male) Console Connectors 2 x USB Type A ports (female) (mouse and keyboard connections) -
Page 13: Troubleshooting
Mac User: Push button switch or USB KVM Switcher Software (Mac OS X 10.4~10.6) Linux User: Push button switch or Universal Hot-Key Commands If you still encounter problems or have any questions regarding the TK-217i, please contact TRENDnet's Technical Support Department. - Page 16 Copyright ©2010. All Rights Reserved. TRENDnet.