TRENDnet TK-1603R Quick Installation Manual page 7

Hot Key Commands
A keyboard hot key command consists of three keystrokes:
Hot Key command = Scroll Lock + Scroll Lock + Command key(s)
After pressing the Scroll Lock key, you have 2 seconds to press the Scroll Lock key
again. You then have another 2 seconds to press a command key. A beep confirms that
the KVM switch is in "Hot Key" mode. If you do not press a key within 2 seconds, the
switch will exit hot key mode.
To select a specific PC port:
For TK-803R
Select PC=
For example, to Select Port 1 on the TK-803R you hit the following key sequence:
Select PC=
For TK1603R
Select PC=
For example, to select Port 1 on the TK-1603R you hit the following key sequence:
Select PC =
To select port 10 on the TK-1603, hit the following key sequence:
Select PC =
MAC USERS
Standard PC Keyboard to MAC Keyboard mapping information:
For a list of all the Hot Key commands, please see the Quick Reference Sheet.
Scroll Lock
+
Scroll Lock +
Scroll Lock
+
Scroll Lock +
Scroll Lock
+
Scroll Lock Scroll Lock
+
Scroll Lock + Scroll Lock
Scroll Lock Scroll Lock
+
Scroll Lock + Scroll Lock
5
Scroll Lock +
Scroll Lock +
Scroll Lock +
Scroll Lock +
Scroll Lock +
=
+ C
F13
+ F10 =
+ F11 =
F14
+ F12
=
F15
Y
1
Y + Z
0 + 1
1 + 0
CD/DVD drive
eject key