Download Print this page

Tecmojo 11150209 Instruction Manual

Steel, 4-post, square hole

Advertisement

Quick Links

Please contact us for any product
related concern and questions
Save These Instructions
This manual contains instructions and warnings that must be followed during the installation and operation of the product described in this
manual. Failure to comply may invalidate the warranty and cause property damage or personal injury.
Thank you for purchasing a Tecmojo product. Please check the product carefully and contact Tecmojo for assistance if any parts are
damaged or missing. Do not attempt to install or use product if it has been damaged. This product contains small items that could be a
choking hazard – keep these items away from children.
For permanent wall mounting, be sure to securely fasten the enclosure to the building structure before operation.
Do not use with equipment that is heavier than the indicated weight capacity for this product. This product is designed to be installed indoors
on wood stud walls, solid concrete walls or brick walls. Make sure that the supporting surface will safely support the weight of the equipment
and all attached hardware and components. It is recommended that installation be performed by a qualified installer. Tecmojo cannot be held
responsible for damage to equipment or personal injury resulting from improper use or installation of product.
Maintenance: we recommend checking on regular basis that the product is secure and safe to use.
Limitations of Liability: In no event will Tecmojo Co. be liable for any damages, whether direct or indirect, special, punitive, incidental or
consequential damages (including, but not limited to, lost profits or revenue, loss of use, lost business opportunities or loss of goodwill) or for
the costs of procuring substitute products, arising out of or in connection with the use of the product, whether such liability arises from any
claim based upon contract, warranty, tort (including negligence), product liability or otherwise, whether or not seller has been advised of the
possibility of such loss or damage. In no event will seller's total cumulative liability, from all causes of action and all theories of liability, exceed
the total amounts actually paid to seller by customer under the order that gives rise to any liability hereunder.
Specification:
SKU#
11150209
11150210
11150211
11150212
Instruction Manual
Steel, 4-post, square hole
Capacity(U)
Width(mm)
38
45
Sales@tecmojo.com
806-Tecmojo (8326656)
www.tecmojo.com
Depth(mm)
MAX:1000
599
MIN:600
Height(mm)
1867
2178

Advertisement

loading
Need help?

Need help?

Do you have a question about the 11150209 and is the answer not in the manual?

Questions and answers

Summary of Contents for Tecmojo 11150209

  • Page 1 Maintenance: we recommend checking on regular basis that the product is secure and safe to use. Limitations of Liability: In no event will Tecmojo Co. be liable for any damages, whether direct or indirect, special, punitive, incidental or consequential damages (including, but not limited to, lost profits or revenue, loss of use, lost business opportunities or loss of goodwill) or for...
  • Page 2: Detailed List

    Sales@tecmojo.com 806-Tecmojo (8326656) Please contact us for any product www.tecmojo.com related concern and questions ITEM M10X20screw kit M8X20screw kit Screw kit Detailed List ITEM QTY. Sketch Plan ITEM QTY. Sketch Plan Left column Right column Top and bottom beams Connection beam - left side...
  • Page 3 Sales@tecmojo.com 806-Tecmojo (8326656) Please contact us for any product www.tecmojo.com related concern and questions Step1 M8 spring washer M8X20 Assemble the connecting left and right beams with the connecting center beam with hexagonal M8*20 screws and M8 spring washers, and repeat the above actions for a total of 8 places.
  • Page 4 Sales@tecmojo.com 806-Tecmojo (8326656) Please contact us for any product www.tecmojo.com related concern and questions Step2 M10X20 M10 spring washer Note that the small holes of the hoist holes are mounted Bottom towards the bottom Assemble the connecting beam with the left and right columns, note that the screws should not be tightened first to facilitate smooth subsequent assembly, and repeat the above actions for a total of 8 places.
  • Page 5 Sales@tecmojo.com 806-Tecmojo (8326656) Please contact us for any product www.tecmojo.com related concern and questions M10X20 Step4 M10 spring washer Bottom Note that the small holes of the hoist holes are mounted towards the bottom The hoist holes of the upper andlower beams are aligned with the screws for positioning, then the top and bottom beams are assembled with the columns and connecting beams, and the above actions are repeated for a total of 8 places.

This manual is also suitable for:

111502101115021111150212