Page 1
Please check the Aura Audio website on a regular basis for latest downloads and updates. In case of any questions please don´t hesitate to contact us for more information via info@auraaudio.fi...
Page 2
Aura Audio S1D MANUAL Version 1.1 INTRODUCTION S1D is a compact passive 3.5-way speaker system. It consists of folded horn-loaded 10” neodymium magnet cone driver, two side- firing reflex tuned 6.5" cone drivers, 6.5” neodymium magnet cone driver loaded with a multi-path waveguide and center mounted 1”...
Page 3
Aura Audio S1D MANUAL Version 1.1 S1D is powered by Aura Audio D80DSP powered controllers. Bespoke rigging and pole mount adapters enable easy and safe deployment from single unit on top of a subwoofer to a larger flown arrays. CREATING ARRAYS WITH S1R AND S1RAD...
Page 4
Aura Audio S1D MANUAL Version 1.1 FIXED INSTALLATION WITH S1Ri AND S1RADi Both S1R and S1RA are also available as S1Ri and S1RADi. These models are intended to be used in fixed installations and feature more economical M8 bolt connection replacing quick release pins found in standard touring models.
Page 5
Aura Audio S1D MANUAL Version 1.1 S$SERIES SYSTEM TUNING TIPS part 1: Delay DELAY MEASUREMENT POSITION GROUND PLANE MEASUREMENT POSITION GROUND PLANE As rule of thumb, all S-series single speakers and array configurations can be quickly (delay) tuned by measuring the distance from rear wall...
Page 6
Aura Audio S1D MANUAL Version 1.1 S$SERIES SYSTEM TUNING TIPS part 2: Measurement Ground plane measurement is recommended for subwoofer and top speaker time alignment measurements to prevent ground reflections to interfere with the measurement results. For system tuning, a full...
Need help?
Do you have a question about the S Series and is the answer not in the manual?
Questions and answers