Virtuox Sleepifi Dream Step-By-Step Instructions

Before You Start
SMARTPHONE REQUIRED:
an Apple or Android smart phone or tablet and connection to the internet.
INSTALL APP: Download & install the
message or email link sent from VirtuOx.
appropriate QR code to directly link to the app installation. Finally you can
just search the Apple App store or Google Play store for
"VirtuOx Sleep". You should see the blue and gray VirtuOx logo.
.
You MUST allow Bluetooth connections when prompted in the app.
NUMBER OF NIGHTS TO TEST:
TEST CONDITIONS:
READING ID:
CHARGE BATTERY:
1
please make sure your test device is sufficiently charged before each
night starting the test. Please use the included USB micro charging
cable provided.
KEEP PHONE CHARGED AND CLOSE DURING NIGHT:
2
will need to keep your phone charging all night and keep it within
3-6 feet of the test device with no obstructions to maintain a quality
signal
DO NOT POWER ON FINGER SENSOR UNTIL
PROMPTED IN APP
MAKE SURE TEST DEVICE
3
THEN OPEN VIRTUOX SLEEP APP ON YOUR PHONE
• Allow Bluetooth permissions. Accept terms. Click Continue.
• SCAN FOR DEVICES SCREEN –
on the sensor.
• POWER ON TEST DEVICE •
device as shown at right. The screen will turn on and a red light
will turn on in the finger sensor ring.
• Tap SCAN. The app scans for and displays nearby finger sensors.
• Tap the desired device. Note the picture on screen may not
match your device exactly.
• Tap CONNECT - app shows that it is connecting to the sleep
device. (Continue to step 4 on back/next page)
FOR ASSISTANCE CALL: 877-897-0063 Reference Reading ID:
VirtuOx Home Sleep Test
Step-By-Step Patient Instructions
Sleepifi Dream, analyzed by EnsoSleep PPG
This sleep test requires you to have
VirtuOx Sleep app from text
Alternatively you may scan the
Devices are charged fully before shipping, but
IS POWERED OFF,
App will prompt you to power
Press the power button on the wrist
Android Phones
& Tablets
Scan QR code for appropriate Device or
search app store for Virtuox Sleep
You
Apple iPhones &
iPads