Virtuox Viatom Oxyfit Step-By-Step Instructions

Before You Start
SMARTPHONE REQUIRED:
Apple or Android smart phone or tablet and connection to the internet.
INSTALL APP: Download the VirtuOx Sleep app from text message or email
link sent from VirtuOx, or go to the Apple App store or Google Play and
search for VirtuOx Sleep app. You should see the blue and grey virtuox logo.
You MUST allow bluetooth connections when prompted in the app.
NUMBER OF NIGHTS TO TEST:
TEST CONDITIONS:
READING ID:
CHARGE BATTERY:
1
charged (60% or more) before each night starting the test. A
charging cable is included, or any micro USB charging cable will
work. You may need to gently pull away the rubber seal covering
the charging port at the read of the device.
KEEP PHONE CHARGED AND CLOSE DURING NIGHT:
2
will need to keep your phone charging all night and keep it within
3-6 feet of the fingertip sensor with no obstructions to maintain a
quality signal
DO NOT POWER ON FINGER SENSOR UNTIL PROMPTED IN APP
MAKE SURE FINGER SENSOR IS POWERED OFF,
3
THEN OPEN VIRTUOX SLEEP APP ON YOUR PHONE
• Allow Bluetooth permissions. Accept terms. Click Continue.
• SCAN FOR DEVICES SCREEN –
on the sensor.
• POWER ON FINGER SENSOR:
the finger sensor or press power button on the side to power
it on.
• Tap SCAN. The app scans for and displays nearby finger sensors.
• Tap the desired device. Note the picture on screen may not
match your device exactly.
• Tap CONNECT - app shows that it is connecting to the sleep
device. (Continue to step 4 on back/next page)
FOR ASSISTANCE CALL: 877-897-0063 Reference Reading ID:
Virtuox Home Sleep Test
Step-By-Step Patient Instructions
Viatom Oxyfit, analyzed by EnsoSleep PPG
This sleep test requires you to have an
Make sure your finger sensor is sufficiently
App will prompt you to power
you should insert a finger into
Charging
Port
under
rubber
seal
You
Rubber Seal
Keep the tip
of your
finger inside
the sensor