Advertisement
Quick Links
TOOLS REQUIRED FOR INSTALLATION
Electric Drill
1/8" wood or metal drill bit
5/16" masonry drill bit
Tape measure
Screwdriver
Level
ALL PICTURES SHOWN ARE FOR ILLUSTRATION PURPOSE ONLY. ACTUAL PRODUCT MAY VARY DUE TO PRODUCT ENHANCEMENT.
ErgoValveBar
INSTALLATION INSTRUCTIONS
4012-SSB, 4012-SSP, 4012-MB, 4012-ORB
IMPORTANT
Check local code for proper placement
of ErgoSlideBar to meet requirement
such as ADA or ANSI 117.1 Consumer
Safety Requirements.
ERGOVALVEBAR CAN BE MOUNTED
THROUGH SHOWER WALL AND
SCREWED DIRECTLY TO WOOD OR
METAL STUD WHEN APPLICABLE.
INSTALLATION QUESTIONS
Before returning your ErgoValveBar to
the store or have any question about
installation or missing parts please
visit the CUSTOMER CARE area on our
website www.PulseShowerSpas.com.
WARRANTY
Please visit
www.PulseShowerSpas.com for
our Manufacture's Lifetime Limited
Warranty information.
Advertisement
Related Manuals for Pulse Seville ErgoValveBar 4012-SSB
Summary of Contents for Pulse Seville ErgoValveBar 4012-SSB
- Page 1 ErgoValveBar INSTALLATION INSTRUCTIONS 4012-SSB, 4012-SSP, 4012-MB, 4012-ORB TOOLS REQUIRED FOR INSTALLATION INSTALLATION QUESTIONS IMPORTANT Before returning your ErgoValveBar to Check local code for proper placement the store or have any question about of ErgoSlideBar to meet requirement installation or missing parts please such as ADA or ANSI 117.1 Consumer visit the CUSTOMER CARE area on our Safety Requirements.
- Page 2 STEP 1 PARTS INCLUDED Position bar on wall at your desired location. Make sure bar is leveled. • Stainless steel rail Trace around mounts with pencil to create your mounting template. • Installation manual Use an allen wrench to remove set screws and remove bar from mounts. STEP 2 Install screws through mounting flange and directly into wood/metal stud or bracing.
Need help?
Do you have a question about the Seville ErgoValveBar 4012-SSB and is the answer not in the manual?
Questions and answers