Ada STREAM PUMP MINI Manual page 6

3. Usage
① Use the suction cup to fix the product to the glass surface.
② After confirming that the main unit is submerged in water, plug the
power cord into the USB adapter. Do not run the submersible pump
idle, as this may cause a malfunction.
[Maintenance Procedure]
●Daily Inspection and Precautions / Periodically check to see if the
flow rate of water coming out of the outflow port has decreased.
●Pump maintenance / Unplug the USB adapter from the power outlet,
disconnect each part, and carefully remove any foreign objects using
tweezers or similar tools. If the impeller or other parts are dirty, wash
off the dirt with a brush or similar tool.
*Do not remove or disassemble the pump unless necessary.
4. Precautions for use
○Do not attach a sponge or other object that will put excessive load to
the inflow part of the cover. Excessive strain on the inflow part will
cause wear and tear on the internal impeller, which may easily cause
problems such as pump stoppage.
○The pump operation sound can always be heard from the Stream
Pump Mini. This is not abnormal. When air enters the pump, it makes
a loud noise that differs from the normal operating sound. If this
happens, unplug the USB adapter from the power outlet to complete-
ly remove the air from the pump, and then turn on the pump again.
Using the pump with air in it may cause the pump to stop, which may
result in malfunction.