Advertisement
Quick Links
BFT Compatible Remotes Instructions
Deimos slider & Thalia control boards
1. Press the OK button 4 times and the screen will display 'Paran'.
2. Press the middle button (-) twice and the screen will display 'Radio'.
3. Press the OK button twice and the screen will display 'Hidden Button'.
4. Press the bottom 2 buttons on the remotes simultaneously and the
screen will display 'Release'.
5. Now release the 2 buttons.
6. Press any buttons on your new remote which you would like to operate
your gate for 2 seconds.
7. Press the + and – buttons on the control board together 4 times to exit
the programming mode.
8. Test your remote.
Programming your remote to your NON-LED screen control board
1. Press S1 on the control board on your gate motor. The green light on the
control board will turn on.
2. Press the 2 bottom buttons simultaneously. The green light will be solid.
3. Press the top left button. The LED light will flash rapidly for about 5
seconds.
4. Test your remote.
www.remotepro.com.au
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for BFT B RCB 0678
Summary of Contents for BFT B RCB 0678
- Page 1 BFT Compatible Remotes Instructions www.remotepro.com.au Deimos slider & Thalia control boards 1. Press the OK button 4 times and the screen will display ‘Paran’. 2. Press the middle button (-) twice and the screen will display ‘Radio’. 3. Press the OK button twice and the screen will display ‘Hidden Button’.
- Page 2 Programming your new remote via your original remote 1. Press and hold the 2 bottom buttons on your original working remote simultaneously until the red LED light turns on the remote. 2. Release the bottom buttons Please note: If your gate begins moving during this process, stop the gate with your original remote and start again.
Need help?
Do you have a question about the B RCB 0678 and is the answer not in the manual?
Questions and answers