ROOMS TO GO ADES 5583 ANTQ BRASS Assembly Instruction

ASSEMBLY INSTRUCTION FOR
ADES 5583 ANTQ BRASS
Model# HW-T5583 / SKU 90155839
1. Screw tube (A), (B) and (C) until tight.
You may need to pull out excess cord gently from
the cord outlet of tube (C).
2. Unscrew and remove pre-set washer (E) and
screw (F) from tube (C) .
3. Insert the tube (C) onto the base and securing it
by tightiening washer (E) and screw (F) by wrench
(G). Attention: Be sure to align the consistency of
the curve on the arm.
4. Socket rings (I) comes pre-assembled to the
sockets. Before placing the shade onto the socket,
please unscrew this socket ring.
5. Install shade (H) onto tube (A) and tighten it
with socket ring (I).
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
---------------------------------------------------------------
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug as a feature to
reduce the risk of electric shock (one blade is larger than
the other). This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified
electrician.Do not use with an extension cord unless the
DO NOT ALTER THE
plug can be fully inserted.
PLUG .
-------------------------------------------------------
BULB TYPE: one type A Max 60W bulb (bulb not
included).